Projectmaterials

steel plates

Steel Plates: A Comprehensive Guide to Basic Information and Weight Calculation

Reading Time: 13 minutes

The article shows the dimensions and weights of steel plates for general use (weight per linear meter depending on steel plate thickness and width). To calculate the weight of steel plates easily, use our online calculator.

STEEL PLATES BASICS

DEFINITION

A steel plate is a broad and flat piece of steel that is produced in a variety of thicknesses and can be used in a multitude of applications. Unlike steel sheets, steel plates are thicker and can be used in structures and constructions requiring higher strength and durability. The thickness of a steel plate is typically greater than 3/16 inches (about 5 mm), distinguishing it from thinner steel sheets. The dimensions of steel plates can vary widely, accommodating needs ranging from heavy machinery manufacturing to the creation of large structural components.

STEEL PLATE VS. STEEL SHEET

The primary difference between steel plates and steel sheets lies in their thickness and their intended use across various applications. Both are made from steel, a versatile and widely used construction and manufacturing material, but their specific characteristics and applications distinguish them.

Steel Sheets
Steel Sheets

Thickness

  • Steel Plate: Steel plates are thicker than steel sheets, generally starting at a thickness of 1/4 inch (about 6.35 mm) and can go up to several inches thick. The exact point at which steel becomes classified as a plate rather than a sheet can vary slightly between different industries and standards, but 1/4 inch is a commonly accepted starting point.

  • Steel Sheet: Steel sheets are thinner than plates, usually less than 3/16 inches (about 4.76 mm). Sheets can be as thin as a few thousandths of an inch. Steel sheets are often classified further based on their thickness, with those thinner than .01 inch being called “foil” and those between .01 inch and .25 inch being referred to as “sheet.”

Applications

  • Steel Plate: Due to their thickness and durability, steel plates are used in applications requiring structural strength and the ability to withstand high pressures, heavy loads, or impact. Common uses include the construction of buildings and bridges, shipbuilding, and the manufacture of heavy machinery and vehicles.

  • Steel Sheet: Steel sheets are used in a wide range of applications that require less structural strength compared to applications for steel plates. They are commonly used in automotive bodies, household appliances, metal roofing, manufacturing of metal containers, and in the fabrication of ductwork and other HVAC components.

Manufacturing Process

Both steel plates and steel sheets are produced via a rolling process, either through hot rolling or cold rolling, which determines their final mechanical properties and surface finish. Hot rolling produces steel plates and sheets with a rough surface but makes them easier to work in terms of cutting and welding. Cold rolling is used to produce steel sheets with a smoother finish and tighter tolerances, making them suitable for applications where precision and aesthetics are important.

Flexibility and Formability

  • Steel Plate: The greater thickness of steel plates makes them less flexible compared to steel sheets. They require more force to bend or shape, making them more suitable for applications where rigidity and durability are critical.

  • Steel Sheet: Steel sheets are more flexible and easier to work with, especially in folding, cutting, and shaping processes. This makes them ideal for applications requiring intricate shapes and designs.

BASIC SPECIFICATIONS

Specifications for steel plates are detailed descriptions of the material’s properties, dimensions, and quality standards they must meet. These specifications are crucial for ensuring that the steel plates are suitable for their intended applications, providing a basis for comparison among materials and ensuring compliance with regulatory and safety standards. The specifications can vary widely depending on the type of steel, its intended use, and the standards set by different organizations and industries. Here are some key aspects typically covered in steel plate specifications:

1. Material Grade

The grade of steel indicates its chemical composition and mechanical properties, such as strength, ductility, and toughness. Different grades are suited for different applications, for example, structural steel (like ASTM A36) for construction, or stainless steel grades (like ASTM A240 Type 304) for corrosion resistance.

2. Thickness

Steel plates come in various thicknesses, typically measured in millimeters or inches. The thickness is a critical specification as it directly impacts the plate’s strength and suitability for specific applications.

3. Width and Length

The dimensions of a steel plate, including its width and length, are specified. These dimensions can vary greatly, with some plates measuring over several meters to accommodate large-scale applications.

4. Mechanical Properties

This includes tensile strength, yield strength, elongation, and impact resistance. These properties are determined through standardized tests and indicate how the steel will behave under different loads and in various conditions.

5. Chemical Composition

Specifications include the allowable concentrations of carbon, manganese, silicon, phosphorus, sulfur, and other alloying elements. The chemical composition influences the steel’s mechanical properties and its resistance to corrosion and wear.

6. Surface Finish

Surface finish specifications address the appearance, texture, and cleanliness of the steel plate. Some applications require smooth, clean surfaces free of scale, such as cold-rolled or pickled and oiled plates.

7. Manufacturing Process

Specifications may also detail the manufacturing process (e.g., hot-rolled, cold-rolled, forged) as it affects the final properties of the steel plate.

8. Certifications and Standards

Steel plates must often meet standards set by organizations such as ASTM (American Society for Testing and Materials), ISO (International Organization for Standardization), and EN (European Norm). Certifications can also include compliance with specific industry regulations, such as those for pressure vessels or marine applications.

9. Testing Requirements

This includes the types of tests the steel plates must undergo to verify their mechanical properties, chemical composition, and other characteristics. Common tests include tensile tests, Charpy V-notch impact tests, and ultrasonic testing.

COMMON MATERIAL GRADES

Steel plates come in a wide variety of types, each tailored for specific applications and environments. Their differentiation is often based on composition, manufacturing process, finish, and specific use cases. Here’s a rundown of some common types of steel plates and their typical applications:

1. Carbon Steel Plates

  • Low Carbon Steel Plates: Also known as mild steel plates, these contain a lower percentage of carbon and are more ductile, making them easy to form. They are used in body panels for automobiles, structural sections for buildings, bridges, and other infrastructure.
  • Medium Carbon Steel Plates: Containing a medium level of carbon compared to other carbon steels, these plates offer a balance between strength and ductility. They are used in manufacturing gears, rails, and structural steel components.
  • High Carbon Steel Plates: With a higher carbon content, these plates are harder and stronger but less ductile. They are used in high-strength applications such as cutting tools and machinery parts.

2. Alloy Steel Plates

Alloy steel plates contain other elements such as manganese, silicon, nickel, titanium, copper, chromium, and aluminum in varying proportions. These elements enhance specific properties like strength, hardness, durability, and resistance to corrosion, making alloy steel plates suitable for use in pipelines, automotive parts, electrical motors, and construction machinery.

3. Stainless Steel Plates

Stainless steel is well-known for its corrosion resistance, provided by a significant amount of chromium (at least 10.5%). Stainless steel plates are used in applications requiring corrosion resistance, such as in chemical plants, food processing plants, and marine applications.

4. Tool Steel Plates

Tool steel is characterized by its hardness, abrasion resistance, and ability to retain shape at high temperatures. These plates are used to make tools like drill bits, dies, molds, and hammers, which require a high resistance to wear and tear.

5. Clad Steel Plates

Clad steel plates are composite plates made by bonding two or more different types of metals. This process combines the beneficial properties of both (or all) metals, such as the corrosion resistance of stainless steel with the strength of carbon steel. Clad plates are used in pressure vessels, chemical tankers, and refineries.

6. Weathering Steel Plates

Also known as Corten steel, weathering steel exhibits increased resistance to atmospheric corrosion compared to other steels. This is because the steel forms a protective layer on its surface under the influence of the weather. It’s commonly used in bridges, rail cars, and architectural structures where maintenance is challenging.

7. Quenched and Tempered Steel Plates

These steel plates undergo a heat treatment process that involves heating to a high temperature, followed by rapid cooling (quenching) and reheating to a moderate temperature (tempering). The result is a steel plate with increased strength and toughness. They are used in structural applications that require high strength, such as in military vehicles and in construction machinery.

ASTM/API/EN STEEL PLATES GRADES

ASTM

ASTM International (formerly known as the American Society for Testing and Materials) provides standards for a wide range of materials, products, systems, and services, including steel plates. These standards cover specifications for the chemical composition, mechanical properties, and manufacturing processes of steel plates, ensuring their quality and suitability for various applications. Below are some of the commonly referenced ASTM standards for steel plates, each tailored to different uses and properties:

ASTM A36

  • Specification for Carbon Structural Steel

  • Used for structural purposes, ASTM A36 steel plates are known for their good weldability, and machinability, and can be heat treated to harden their surface.

ASTM A283

  • Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

  • Suitable for general structural purposes, offering grades with varying strength levels.

ASTM A285

  • Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

  • Primarily for pressure vessels, providing plates with low and intermediate tensile strengths.

ASTM A516

  • Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

  • Widely used in the construction of boilers and pressure vessels, offering good weldability and excellent notch toughness.

ASTM A572

  • Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

  • Offers higher strength than A36, with additional benefits in terms of strength, weldability, and formability, making it suitable for structural applications.

ASTM A588

  • Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

  • Known as weathering steel, this specification is notable for its atmospheric corrosion resistance, making it ideal for structures exposed to the elements.

ASTM A633

  • Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

  • Designed for welded, riveted, or bolted construction, offering improved notch toughness.

ASTM A656

  • Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

  • Suitable for applications where improved formability and weldability are critical.

ASTM A710

  • Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates

  • Used for weight reduction or increased durability, with enhanced resistance to atmospheric corrosion.

ASTM A829

  • Specification for Alloy Structural Steel Plates

  • Provides specifications for alloy steel plates for structural and mechanical applications where toughness, strength, and high wear resistance are required.

API

The American Petroleum Institute (API) establishes standards and specifications for the oil and natural gas industry to ensure safety, reliability, and sustainability in operations. Within the scope of materials and equipment, API specifications for steel plates are particularly critical for the construction of storage tanks, pipelines, and other infrastructure in the oil and gas sector.

These specifications define the material’s chemical composition, mechanical properties, toughness, and other critical factors necessary for the harsh environments encountered in the industry. Here are some of the key API specifications for steel plates:

API Spec 2H

  • Specification for Carbon Manganese Steel Plate for Offshore Structures

  • This specification covers high-strength, low-alloy steel plates intended for use in welded construction of offshore structures. They are particularly noted for their resistance to the corrosive effects of salt water.

API Spec 2W

  • Specification for Steel Plates for Offshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)

  • API Spec 2W covers steel plates created using Thermo-Mechanical Control Processing. This specification is intended for the fabrication of stationary offshore structures that require notch toughness testing for the welded joints.

API Spec 2Y

  • Specification for Steel Plates, Quenched-and-Tempered, for Offshore Structures

  • Similar to API Spec 2H, but for steel plates that have been quenched and tempered. This specification is focused on plates requiring high strength and toughness to withstand the extreme conditions of offshore environments.

API Spec 5L

  • Specification for Line Pipe

  • Though primarily for pipe specification, API 5L also covers the steel plate material used to manufacture both seamless and welded steel line pipe. This specification includes various grades of steel plates that are used in the oil and gas pipeline industry, ensuring they can handle the transport of gas, water, and oil under high pressures and temperatures.

API Spec 12F

  • Specification for Shop Welded Tanks for Storage of Production Liquids

  • This specification includes requirements for the material, design, fabrication, and testing of small, shop-fabricated, vertical, cylindrical, aboveground, closed- and open-top, welded steel storage tanks for oil storage. It outlines specific requirements for the steel plates used in the construction of these tanks.

API Spec 650

  • Welded Tanks for Oil Storage

  • API Spec 650 is a widely used standard for the design and construction of large, welded, steel storage tanks for oil storage. It provides guidelines for the material selection, design, fabrication, and inspection of tanks. The specification includes detailed requirements for the steel plates used in tank construction, ensuring their suitability for holding various types of oil products under different operating conditions.

EN/ISO 

The EN (European Norm) and ISO (International Organization for Standardization) standards are critical in defining the specifications for steel plates used in various industries across the globe. These specifications cover a wide range of criteria, including chemical composition, mechanical properties, dimensions, and additional requirements for fabrication, welding, and application suitability. Here’s a summary of some key EN ISO specifications relevant to steel plates:

EN 10025

  • Hot rolled products of structural steels

  • This series of standards is among the most commonly referenced for structural steel plates. It encompasses several parts, each focusing on specific types of structural steel, such as non-alloy structural steels, fine-grain structural steels, and structural steels with improved atmospheric corrosion resistance. The standards define the grades, mechanical properties, and quality criteria for hot-rolled structural steel products.

EN 10028

  • Flat products made of steel for pressure purposes

  • EN 10028 specifies requirements for flat products for use in pressure equipment made of weldable non-alloy and alloy steels with specified elevated temperature properties. It covers a wide range of steel grades designed to withstand high pressures and temperatures in various industrial applications.

ISO 630

  • Structural steels — Plates, wide flats, bars, sections and profiles

  • This international standard specifies qualities for general-purpose structural steels. It includes six parts that detail the chemical composition and mechanical properties required for steel plates used in the construction industry, among other applications.

EN 10149

  • Hot rolled flat products made of high-yield strength steels for cold forming

  • This set of standards specifies the requirements for flat products made of high-yield strength steels intended for cold forming. It includes details on the chemical composition, mechanical properties, and manufacturing processes, ensuring that the steel plates are suitable for bending, folding, and cold-forming processes.

EN 10225

  • Weldable structural steels for fixed offshore structures

  • EN 10225 specifies requirements for weldable structural steels used in the construction of fixed offshore structures. It focuses on plates, sections, and tubulars with high resistance to offshore environments, including resistance to brittle fracture.

ISO 15614

  • Specification and qualification of welding procedures for metallic materials — Welding procedure test

  • While not exclusively for steel plates, ISO 15614 provides guidelines for the specification and qualification of welding procedures for metallic materials. This series of standards ensures that the welding of steel plates and other metallic materials meets the required criteria for different welding methods, enhancing the reliability and safety of welded structures.

TYPES BY MANUFACTURING PROCESS

The types of steel plates can also be categorized based on their manufacturing process. Each manufacturing process confers distinct characteristics and properties to the steel plate, making it suitable for various applications. Here are some of the common steel plate types classified by their manufacturing process:

1. Hot Rolled Steel Plates

  • Process: These steel plates are made by heating steel slabs and then rolling them at a high temperature above the steel’s recrystallization temperature. This process allows the steel to be formed into various shapes and sizes.
  • Characteristics: Hot-rolled steel plates have rough surfaces and loose tolerances but are known for their malleability and ease of welding. They are typically cheaper than their cold-rolled counterparts.
  • Applications: Construction, railroad tracks, and general fabrication.

2. Cold Rolled Steel Plates

  • Process: Cold rolling involves processing hot rolled steel plates further, by cooling at room temperature and then rolling them. The process provides a closer tolerance and a smoother surface.
  • Characteristics: Cold-rolled steel plates have a smooth finish, higher strength, and tighter dimensional tolerances than hot-rolled plates. However, they are more brittle and more expensive to produce.
  • Applications: Automotive parts, appliances, metal furniture, and construction.

3. Forged Steel Plates

  • Process: Forging steel involves shaping metal using localized compressive forces, like hammering or pressing. Forged steel plates are formed under high pressure, which alters the grain structure of the steel, enhancing its toughness and durability.
  • Characteristics: Forged steel plates are known for their strength, toughness, and resistance to wear and impact. They also have a fine-grain structure.
  • Applications: Machinery parts, tools, and applications requiring structural integrity under high stress.

4. Clad Steel Plates

  • Process: Cladding involves the bonding of two or more different types of metals together, typically through rolling or explosion welding. The process combines the beneficial properties of both metals.
  • Characteristics: Clad steel plates offer a combination of properties, such as the strength of the base metal with the corrosion resistance of the cladding material.
  • Applications: Pressure vessels, shipbuilding, and pipelines.

5. Quenched and Tempered Steel Plates

  • Process: These steel plates undergo a heat treatment process involving quenching (rapid cooling from a high temperature) and tempering (reheating to a lower temperature and then cooling). This process enhances the strength and toughness of the steel.
  • Characteristics: Quenched and tempered steel plates exhibit high strength, toughness, and wear resistance. They are less brittle than standard hardened steel.
  • Applications: Military vehicles, construction machinery, and wear-resistant applications.

Difference Steel Plate vs. Rolled Steel Plate

The terms “steel plate” and “rolled steel plates” often create some confusion due to their overlapping usage in the industry. However, the distinction generally lies in the context of how the steel has been processed and its intended application. Let’s clarify the difference:

Steel Plate

The term “steel plate” refers broadly to any flat steel product that is thicker than a sheet, usually greater than 1/4 inch (6 mm) in thickness. Steel plates can be manufactured through a variety of processes including casting, forging, and rolling. They come in a wide range of sizes and grades, each suited to different applications, from construction and shipbuilding to manufacturing heavy machinery and pressure vessels. The term is very generic and doesn’t specify the manufacturing process used to produce the steel plate.

Rolled Steel Plates

“Rolled steel plates,” on the other hand, specifically refer to steel plates that have been produced by rolling, one of the most common methods for steel plate production. This category includes both hot-rolled and cold-rolled steel plates:

  • Hot Rolled Steel Plates: These are produced by heating steel slabs and rolling them at high temperatures where the steel is in a pliable state. This process allows for easier shaping and forming of the steel into large plates. Hot-rolled steel plates are typically used where precise shapes and tolerances are not required.

  • Cold Rolled Steel Plates: This process takes hot rolled steel and processes it further at room temperature to achieve closer dimensional tolerances, a smoother surface finish, and improved strength. Cold-rolled steel plates are often used in applications requiring more precise dimensions and better surface conditions.

Key Differences

  1. Manufacturing Process: The main difference is in the manufacturing process—while “steel plate” can refer to any thick, flat piece of steel regardless of how it’s made, “rolled steel plates” specifically denote plates produced by rolling.

  2. Precision and Finish: Rolled steel plates, especially cold-rolled ones, tend to have closer tolerances, a smoother finish, and possibly higher strength due to work hardening compared to steel plates that may be produced by other processes.

  3. Applications: The choice between steel plate and rolled steel plates depends on the application’s specific requirements, including the needed size, strength, surface quality, and tolerances.

WEIGHT OF STEEL PLATES

THE 3 DIMENSIONS TO CONSIDER

The three dimensions of steel plates are:

  • Length (in meters or inches/feet)
  • Width (in meters or inches/feet)
  • Thickness (in millimeters or inches)
steel plates dimensions
steel plates dimensions

These dimensions are used to calculate the weight (in kg. or Lbs.) of steel plates, as explained below.

In a hurry? Calculate the weight of steel plates online using our online calculator!

WEIGHT CALCULATION FORMULA

Plates in Metric Sizes

The weight of steel plates is typically calculated based on their thickness, width, length, and the density of steel. The standard formula used for calculating the weight of a steel plate in kilograms is:

Weight (kgs.) = Thickness × Width × Length × Density of steel

For steel, the density is commonly assumed to be 7,850 kg/m³ (or 7.85 g/cm³). However, this can slightly vary depending on the specific composition and grade of steel (see below the density of the most common steel plate grades, i.e. carbon steel, stainless steel, alloy steel, and tool steel).

The dimensions (thickness, width, and length) must be in meters to match the density units (kg/m³) for the calculation to result in kilograms. If you have the dimensions in different units, such as millimeters, they should be converted to meters first.

For example, to calculate the weight of a steel plate with a thickness of 10mm (0.01 m), a width of 1m, and a length of 2m:

Weight=0.01 m×1 m×2 m×7,850 kg/m3=157 kg

Plates in Imperial Sizes

Steel plates are generally manufactured in standardized widths (36″, 48″, and 60″ the most common) and lengths (96″, 120″, and 144″).

To calculate the weight in Lbs. of a specific imperial steel plate the following formula shall be used:

Weight (Lbs) = Weight (lb/ft2) * Width (ft) * Length (ft)

The Weight (lb/ft2) by plate thickness is shown in this table (based on carbon steel material density):

Plate Thickness
(in inches)
Weight
(lb/ft2)
3/167.65
1/410.2
5/1612.8
3/815.3
7/1617.9
1/220.4
9/1622.9
5/825.5
11/1628.1
3/430.6
13/1633.2
7/835.7
140.8
1 1/845.9
1 1/451.0
1 3/856.1
1 1/261.2
1 5/866.3
1 3/471.4
1 7/876.5
281.6
2 1/886.7
2 1/491.8
2 1/2102
2 3/4112
3122
3 1/4133
3 1/2143
3 3/4153
4163
4 1/4173
4 1/2184
5204
5 1/2224
6245
6 1/2265
7286
7 1/2306
8326
9367
10408

DENSITY OF STEEL BY GRADE

The density of steel varies slightly depending on its composition and the specific grade, but for most purposes in engineering and construction, it is considered to average around 7,850 kg/m³ (or 7.85 g/cm³). This value is widely used for calculating the weight of steel products and structures in various applications. However, the addition of different alloys can slightly alter the density.

Here are the densities for some common steel types and grades:

Carbon Steel

  • Low Carbon Steel: Approximately 7,850 kg/m³
  • Medium Carbon Steel: Approximately 7,850 kg/m³
  • High Carbon Steel: Approximately 7,850 kg/m³

The slight variations in carbon content among these types of steel do not significantly affect their density.

Alloy Steels

Alloy steels incorporate elements like chromium, nickel, molybdenum, silicon, manganese, and vanadium, which can slightly influence their density. However, in most cases, the density remains close to the average for carbon steel, around 7,850 kg/m³, because these alloying elements are used in relatively small amounts.

Stainless Steel

The density of stainless steel varies depending on the specific alloy and its composition. Generally, it ranges from 7,700 kg/m³ to 8,000 kg/m³. For example:

  • Austenitic Stainless Steels (e.g., 304, 316): Approximately 7,900 kg/m³ to 8,000 kg/m³
  • Ferritic Stainless Steels (e.g., 430): Approximately 7,700 kg/m³
  • Martensitic Stainless Steels (e.g., 410): Approximately 7,750 kg/m³

Tool Steels

Tool steels, used in the manufacture of tool bits and cutting instruments, have a density similar to that of carbon and alloy steels, averaging around 7,850 kg/m³.

WEIGHT CHART FOR STOCK SIZES

Weights of carbon steel plates by thickness/width (metric sizes) are expressed in kilograms per linear meter:

Plate Thickness (mm)Weight (kg/m2)kg/meter (width 1200mm)kg/meter (width 1500mm)kg/meter (width 1800mm)kg/meter (width 2400mm)
323.5528.335.342.456.5
431.437.747.156.575.4
539.2547.158.970.794.2
647.156.570.784.8113
862.875.494.2113150.7
1078.594118141188
1294.2113141170226
16125.6151188226301
20157188236283377
22172.7207259311415
25196.25236294353471
28219.8264330396528
32251.2301377452603
36282.6339424509678
40314377471565754
45353.25424530636848
50392.5471589707942
55431.755186487771036
604715657078481130
655106127659181224
70549.56598249891319
75588.7570788310601413
8062875494211301507
90706.5848106012721696
100785942117814131884

**DISCLAIMER: Accuracy and Reliability of Content**

The information provided in this blog post is intended for general informational purposes only and should not be construed as professional advice. While we strive to provide accurate and up-to-date information, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the content contained herein. Any reliance you place on the information presented in this blog post is strictly at your own risk. We disclaim any liability for any loss or damage, including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from reliance on information contained in this blog post. We encourage readers to verify the accuracy and relevance of any information presented here with other sources and seek professional advice or guidance where appropriate. Links to third-party websites or resources provided in this blog post are for convenience only and do not imply endorsement or approval of the content, products, services, or opinions expressed on those websites. We have no control over the nature, content, and availability of those sites and assume no responsibility for their accuracy, legality, or decency. We reserve the right to modify, update, or remove any content in this blog post at any time without prior notice. By accessing and using this blog post, you acknowledge and agree to these terms and conditions. If you do not agree with these terms, please refrain from accessing or using the information provided herein.

About the Author

Fabrizio S.

Fabrizio S.

Fabrizio is a seasoned professional in the international trading of materials for projects, including piping, steel, and metal commodities with a distinguished career spanning over two decades. He has become a pivotal figure in the industry, renowned for his expertise in bridging the gap between EPC contractors, end users, manufacturers, and stockists to facilitate the seamless delivery of complex piping product packages across the globe.Starting his journey with a strong academic background in business administration and international trade, Fabrizio quickly distinguished himself in the field through his adept negotiation skills, strategic vision, and unparalleled knowledge of the project materials market. His career trajectory has seen him collaborate with leading names in the construction, oil & gas, and petrochemical industries, earning a reputation for excellence in executing large-scale projects (EPC Contractors, Oil & Gas End Users).At the core of Fabrizio's success is his ability to understand the intricate needs of EPC contractors and end users, aligning these with the capabilities of manufacturers and stockists. He excels in orchestrating the entire supply chain process, from product specification and procurement to logistics and on-time delivery, ensuring that each project phase is executed flawlessly.Fabrizio's role involves intense coordination and communication, leveraging his extensive network within the industry to negotiate competitive prices, manage complex logistical challenges, and navigate the regulatory landscape of international trade. His strategic approach to package assembly and delivery has resulted in cost efficiencies, timely project execution, and high satisfaction levels among stakeholders.Beyond his professional achievements, Fabrizio is an active participant in industry forums and conferences, such as Adipec, Tube, and similar, where he shares insights on market trends, supply chain optimization, and the future of project materials trading. His contributions to the field are not only limited to his operational excellence but also include mentoring young professionals entering the trade. Fabrizio is one of the co-founders of Projectmaterials, a B2B marketplace targeting the above markets. https://www.linkedin.com/in/fvs20092023/

Should you wish to reach out to the author of this article, we invite you to contact us via email.

Appreciate this content? Consider showing your support by tipping the author!

tether USDT

0xB1384F161400810A7B23DE63F02990EC8A7A3e36

bitcoin logo payment

bc1qs5h47qjmefpxhrw8gddl6ms9les23mvhcl9gvu

84 Responses

    1. Thank you, Kuna! I’m glad you found the information helpful. It’s great to hear that many people are finding this article useful. If you have any further questions or need more information, feel free to ask.

    1. Thank you for your kind words about the article on steel plate weight metric sizes. I’m glad you found the information informative and valuable. It’s great to know that the insights shared were helpful to you.

      While we appreciate your offer to assist with udyam registration, this particular discussion is focused on steel plate weight and metric sizes. However, I’m sure there are individuals who may find your services beneficial. If anyone is in need of udyam registration support, they can reach out to you through the link you provided.

      If you have any specific questions or further thoughts related to steel plate weight or metric sizes, please feel free to share them, and I’ll be more than happy to help.

    1. Thank you for finding the content helpful! We strive to provide informative and useful information to our readers. If you have any specific questions or need further assistance regarding steel plate weights or any related topic, please feel free to ask. We’re here to help!

    1. Thank you, Vikash Kumar, for your appreciation of the article on steel plates weight (metric sizes). We’re glad to hear that you found it helpful. If you have any further questions or need more information about steel plate weights, please feel free to ask.

    1. Thank you, Ram, for your positive feedback on the article about steel plate weights. I’m glad you found it excellent and helpful. If you have any specific questions or further comments about the topic, feel free to let us know.

    1. Thank you, Sarkari, for appreciating the content shared on this post about the weight of steel plates in metric sizes. It’s always great to hear positive feedback from users like you. If you have any specific questions or need further information regarding steel plate weights or any related topic, please feel free to ask.

    1. Thank you, Sarkari Naukri, for appreciating the information provided in this post about the weight of steel plates in metric sizes. It’s great to hear that you found it helpful. If you have any specific questions or need further assistance regarding steel plates or any related topic, please feel free to ask.

    1. Thank you, Ayush Rawat, for your kind words! I’m glad to hear that you found the information helpful. If you have any further questions or need more assistance regarding steel plate weights or any related topic, feel free to ask. I’m here to help!

    1. Thank you, Primce! We’re glad to hear that you found the article on steel plate weights helpful. If you have any further questions or need additional information on this topic, feel free to ask.

    1. Thank you for your comment! I’m glad you found the information on steel plate weight useful. Sometimes, it’s the basic daily life information that can come in handy, especially when it comes to materials like steel plates. They are commonly used in various industries and knowing their weight in metric sizes can be helpful for transportation, construction, or any other application where weight plays a crucial role. If you have any more questions or need further assistance regarding steel plates or any other topic, feel free to ask!

    1. Thank you, Steel Plates, for finding the information on steel plates weight useful. We’re glad to hear that it has been helpful to you. If you have any further questions or need additional information regarding steel plates or any related topic, please don’t hesitate to ask.

    1. Thank you, Sarkarijobsimp, for your positive feedback on our article about the weight of steel plates. We are glad to hear that you found it helpful. If you have any further questions or if there’s anything else we can assist you with regarding steel plates or any other topic, please feel free to let us know.

  1. Sarkari Result is a highly popular and reliable online platform that serves as a gateway for millions of job seekers in India to explore and access various government job opportunities. In a country where government jobs are highly sought after due to their stability, security, and numerous benefits, Sarkari Result plays a crucial role in providing comprehensive and up-to-date information about these vacancies.

  2. Good information. This really reduces our Job and also makes us understand the importance of information regarding steel.

  3. United States Steel Plates are available in a range of metric sizes, each with its own weight specifications. These weight specifications are based on the dimensions of the steel plate, and are typically expressed in kilograms per square meter (kg/m²). For example, a 6mm thick steel plate with dimensions of 2000mm x 1000mm would have a weight of approximately 47.1 kg/m². Similarly, a 10mm thick steel plate with dimensions of 2500mm x 1250mm would have a weight of approximately 78.5 kg/m². These weight specifications are important for applications where the weight of the steel plate is a critical factor, such as in the construction of buildings, bridges, and heavy machinery. United States Electric Razor

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

RELATED POSTS

Didn’t find an answer?

Ask AI! 👉

Try our Artificial Intelligence to find an answer to any of your technical and commercial questions

  • AI: Hi, ask any technical or commercial question!

Thinking... ...

trusted by over 3M readers/Year worldwide