Projectmaterials

piping products e1548871937336

Ensuring Compatibility: Matching Piping Materials as per ASTM Specifications

Reading Time: 9 minutes

In constructing a piping system, engineers must ensure that the material specifications for various piping components (including pipes, fittings, flanges, stud bolts, and valves) are consistent in terms of material grades. The article provides ASTM piping material compatibility tables to guarantee uniformity in material grades throughout the system design.

PIPING MATERIALS COMPATIBILITY

WHY MATERIALS FOR PIPING PRODUCTS SHOULD MATCH?

Ensuring that the ASTM material grades of different piping products—such as pipes, valves, fittings, flanges, and stud bolts—match is crucial for several reasons, all of which contribute to the overall integrity, safety, and performance of the piping system:

piping isometrics
piping isometrics

1. Chemical Compatibility

Matching material grades ensures that all components have similar chemical compositions, which is essential for preventing galvanic corrosion. Galvanic corrosion can occur when two dissimilar metals are in electrical contact in the presence of an electrolyte, causing the more anodic material to corrode faster than it would alone.

2. Mechanical Integrity

Components with matching material grades have similar mechanical properties, such as tensile strength, yield strength, and elongation. This uniformity is vital for the system’s mechanical integrity under various operational conditions, including high pressure, temperature fluctuations, and dynamic loads.

3. Thermal Compatibility

Materials with similar grades exhibit comparable thermal expansion coefficients. When exposed to temperature changes, components expand and contract at similar rates, reducing the risk of thermal stress, leaks, or material failures at the joints.

4. Corrosion Resistance

Uniform material grades ensure consistent corrosion resistance throughout the piping system. This uniformity is critical in environments exposed to corrosive substances or extreme conditions, helping to prevent localized corrosion and ensuring the longevity of the system.

5. Weldability

Matching material grades across components improves the weldability of the connections, ensuring strong, leak-proof welds. Disparities in material composition can lead to weld defects such as porosity, cracking, or incomplete fusion, compromising the joint’s integrity.

6. Regulatory and Standards Compliance

Adhering to specific material grades across piping components ensures compliance with industry standards and regulatory requirements, which are designed to safeguard the system’s safety and reliability.

7. Operational Efficiency and Safety

A piping system with uniformly matched material grades is easier to maintain and less likely to suffer premature failures, ensuring operational efficiency and safety. This uniformity facilitates easier inspection, maintenance, and replacement processes, contributing to the overall sustainability of the system.

PIPING MATERIALS MATCH TABLE (ASTM GRADES)

A piping materials compatibility or match table, specifically concerning ASTM (American Society for Testing and Materials) grades, is a comprehensive reference tool used in the design and construction of piping systems.

This table outlines which materials are compatible based on their ASTM grades, ensuring that all components of the piping system—such as pipes, valves, fittings, flanges, and stud bolts—can work together effectively without risk of failure due to material incompatibility.

A piping materials compatibility table is an essential resource during the design phase of a piping system, assisting engineers and designers in selecting materials that match in terms of ASTM grades. It helps in creating a harmonized system where all components possess compatible properties, thereby enhancing the system’s overall reliability, safety, and performance.

The piping materials match table reported below shows, for example, that an A106 Gr. A pipe matches with ASTM A234 buttweld fitting, with ASTM A105 forged fittings, flanges, and valves, with A216 WCB cast valves, and with ASTM A193 B7 stud bolts. The same logic applies to any other ASTM material grade listed in the table.

The table starts with the ASTM material grades for pipes and continues by listing the compatible material grades for any additional piping component (buttweld fittings, forged products such as flanges, socket-weld/threaded fittings, cast valves, and stud bolts):

PIPING MATERIALSPIPESBW FITTINGSFORGINGS*CAST VALVESSTUD BOLTS
High-Temperature Carbon SteelA106 Gr AA234 Gr WPAA105A216 Gr WCBA193 Gr B7
A194 Gr 2H
A106 Gr B/A53 Gr B/API 5L Gr. BA234 Gr WPBA105A216 Gr WCB
A106 Gr CA234 Gr WPCA105A216 Gr WCB
Carbon Steel
Alloy High-Temp
A335 Gr P1A234 Gr WP1A182 Gr F1A217 Gr WC1A193 Gr B7
A194 Gr 2H
A335 Gr P11A234 Gr WP11A182 Gr F11A217 Gr WC6
A335 Gr P12A234 Gr WP12A182 Gr F12A217 Gr WC6
A335 Gr P22A234 Gr WP22A182 Gr F22A217 Gr WC9
A335 Gr P5A234 Gr WP5A182 Gr F5A217 Gr C5
A335 Gr P9A234 Gr WP9A182 Gr F9A217 Gr C12
A 335 Gr P91A234 Gr WP91A182 Fr F91
Carbon Steel
Alloy Low-Temp
A333 Gr 6A420 Gr WPL6A350 Gr LF2A352 Gr LCBA320 Gr L7
A194 Gr 7
A333 Gr 3A420 Gr WPL3A350 Gr LF3A352 Gr LC3
Austenitic
Stainless Steel
A312 Gr TP304A403 Gr WP304A182 Gr F304A182 Gr F304A193 Gr B8
A194 Gr 8
A312 Gr TP316A403 Gr WP316A182 Gr F316A182 Gr F316
A312 Gr TP321A403 Gr WP321A182 Gr F321A182 Gr F321
A312 Gr TP347A403 Gr WP347A182 Gr F347A182 Gr F347
* Forgings include: forged fittings, flanges, forged valves, some types of gaskets
 

KEY ASTM MATERIALS FOR PIPING

STEEL PIPES

ASTM material grades for pipes specify the composition, mechanical properties, and manufacturing methods for different types of pipes used in various applications, including construction, oil and gas, chemical processing, and water transport. These grades are established by the American Society for Testing and Materials (ASTM) to ensure that materials meet specific minimum standards for performance and safety.

Steel pipes
Steel pipes

Here are some common ASTM material grades for pipes:

Carbon Steel Pipes

  • ASTM A53: Used for welded and seamless steel pipes in both black and galvanized finishes, applicable for mechanical and pressure applications.
  • ASTM A106: Covers seamless carbon steel pipes for high-temperature service, suitable for bending, flanging, and similar forming operations.
  • ASTM A333: Specifies seamless and welded steel pipe for low-temperature service.

For more details about ASTM carbon steel grades for pipes, consult this article.

Alloy Steel Pipes

  • ASTM A335: For seamless ferritic alloy-steel pipe designed for high-temperature service, including P1, P2, P5, P9, P11, P22, and P91.
  • ASTM A691: Covers carbon and alloy steel pipe, electric-fusion-welded for high-pressure service at high temperatures.

For more details about ASTM low-alloy steel grades for pipes (chrome-moly), consult this article.

Stainless Steel Pipes

  • ASTM A312: Covers seamless and welded austenitic stainless steel pipes used for high-temperature and general corrosive service.
  • ASTM A358: Pertains to electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for high-temperature and general corrosive service.

For more details about ASTM stainless steel grades for pipes, consult this article.

Other Material Grades

  • ASTM A790: Specifies seamless and welded ferritic/austenitic stainless steel pipe (duplex stainless steel).
  • ASTM A928: superduplex pipes
  • ASTM A252: For welded and seamless steel pipe piles used in the construction of marine and foundation structures.
  • ASTM A519: Covers several grades of carbon and alloy steel seamless mechanical tubing.

CAST VALVES

ASTM material grades for cast valves specify the composition, mechanical properties, and applicable testing requirements for various types of valve materials. These grades ensure that the materials used in valve manufacturing meet specific standards for performance, durability, and safety across a wide range of applications, including industrial, chemical, water treatment, and oil and gas sectors.

Cast Ball Valve
Cast Ball Valve

Below are some common ASTM material grades used for cast valves:

Carbon Steel Cast Valves

  • ASTM A216 (WCA, WBC, WCC): Standard specification for carbon steel castings suitable for fusion welding for high-temperature service. This grade is widely used for general industrial applications.
  • ASTM A352 LCB/LCC: Covers low-temperature carbon steel valve castings. LCB and LCC variants offer excellent toughness at low temperatures.

Stainless Steel Cast Valves

  • ASTM A351 (CF8, CF8M): Specification for cast austenitic stainless steel valve castings, equivalent to Type 316 stainless steel. CF8M is used for its resistance to corrosive media and high temperatures.
  • ASTM A351 CF3M: Similar to CF8M but with lower carbon content, making it more suitable for welding and applications where corrosion resistance, especially to sulphuric acids, is critical.

Alloy Steel Cast Valves

  • ASTM A217 WC6: Specification for alloy steel castings for high-temperature service, typically used for pressure-containing parts suitable for high-temperature service.
  • ASTM A217 C5: Another alloy steel casting grade used for high-temperature service, offering good strength and resistance to thermal fatigue and corrosion.

Special Alloys Cast Valves

  • ASTM A494 CW6M: Specification for nickel-copper alloy castings, offering excellent resistance to seawater and acidic environments.
  • ASTM A995 4A (CD3MN): Duplex stainless steel castings provide high strength and resistance to chlorides and stress corrosion cracking.

For more details about the ASTM material grades for cast (and forged valves), refer to this article.

FORGED PIPING PRODUCTS

ASTM standards specify the materials used for various components in piping systems, including forged valves, flanges, and fittings. These materials are chosen based on their mechanical properties, corrosion resistance, and suitability for the intended service environment. Below are some commonly specified ASTM material grades for forged valves, flanges, and fittings:

Forged Valves

forged valves
forged valves
  • ASTM A105: This specification covers carbon steel forgings for piping applications, including valves. It is widely used for its good mechanical properties and cost-effectiveness in moderate to high-temperature service.
  • ASTM A182: This standard specifies forged or rolled alloy and stainless steel pipe flanges, forged fittings, valves, and parts, particularly suitable for high-temperature service. Grades under A182 include F304, F316, F321, F347 (austenitic stainless steels), F5, F9, F11, F22 (alloy steels), and others.

Check this article for more information about the ASTM materials for forged valves.

Flanges (ASME B16.5)

wn flange
wn flange
  • ASTM A105: As mentioned, A105 is also the standard specification for carbon steel flanges for ambient and higher-temperature service in pressure systems.
  • ASTM A350: This specification covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings, and valves intended primarily for low-temperature service and requiring notch toughness testing. Grades include LF2 and LF3.

Check this article for more information about the ASTM materials for forged flanges.

Forged Fittings (ASME B16.11)

Forged Fittings ASME B16.11
Forged Fittings ASME B16.11
  • ASTM A105: Again, A105 is applicable here for carbon steel forged fittings.
  • ASTM A182: Similar to its use for valves, A182 covers a wide range of alloy and stainless steel grades for forged fittings suitable for high-temperature and general corrosive service.
  • ASTM A234: This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are used in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Grades include WPB for carbon steel and WP5, WP9, WP11, and WP22 for alloy steels.

Check this article for more information about the ASTM materials for forged fittings ASME B16.11.

BUTTWELD FITTINGS

ASTM materials for buttweld fittings specify the composition, mechanical properties, and other important criteria necessary for ensuring that these components are suitable for their intended use, especially in piping systems that require seamless flow and strong, leak-proof connections.

buttweld fittings
buttweld fittings

Here are some commonly used ASTM material grades for buttweld fittings:

Carbon Steel Buttweld Fittings

ASTM A234: This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are used for moderate and high-temperature service. Grades include WPB (wrought grade of carbon steel) and WPC, along with alloy grades like WP1, WP5, WP9, WP11, WP22, and WP91 for different alloy compositions and intended service conditions.

Stainless Steel Buttweld Fittings

ASTM A403: This standard specifies wrought austenitic stainless steel piping fittings for corrosive and high-temperature service. Grades include WP304, WP304L, WP316, WP316L, WP321, and WP347, among others, which correspond to different types of stainless steel alloys with varying carbon contents and additional alloying elements for specific properties like corrosion resistance and temperature endurance.

Alloy Steel Buttweld Fittings

ASTM A234: As mentioned, this specification also includes various alloy steel grades suitable for buttweld fittings, designed for high-temperature service. The alloy grades such as WP5, WP9, WP11, WP22, and WP91 offer enhanced strength, durability, and resistance to high temperatures and pressures.

High Yield Carbon Steel Buttweld Fittings

ASTM A860: This specification covers wrought high-strength ferritic steel butt-welding fittings of seamless and electric fusion-welded construction for applications in high-pressure gas and oil transmission and distribution systems. Grades include WPHY 42, WPHY 52, WPHY 60, WPHY 65, and WPHY 70, which indicate the yield strength of the material in ksi.

Special Fittings

ASTM A815: Specifies wrought ferritic, ferritic/austenitic, and martensitic stainless steel piping fittings for general corrosive service, with grades including UNS S31803, S32205 (duplex), and UNS S32750 (super duplex), offering higher strength and corrosion resistance compared to standard austenitic stainless steel grades.

Check this article for more information about the ASTM materials for butt-weld fittings ASME B16.9.

STUD BOLTS 

ASTM materials for stud bolts are specified to ensure that these fasteners meet the necessary standards for strength, corrosion resistance, and durability required in various applications, including piping systems, flanges, and pressure vessels. Stud bolts are critical components in ensuring tight and secure connections in industrial environments.

stud bolts
stud bolts

Here’s a look at commonly used ASTM material grades for stud bolts:

Carbon and Alloy Steel Stud Bolts

ASTM A193: This specification covers alloy and stainless steel bolting materials for high-temperature or high-pressure service. Grades within A193 suitable for stud bolts include B7 (chromium-molybdenum steel) for high-temperature services, B7M (similar to B7 but with restricted hardness requirements), and B16 (a higher-temperature variant of B7). For corrosion-resistant applications, grades like B8 (304 stainless steel) and B8M (316 stainless steel) are used.

Stainless Steel Stud Bolts

ASTM A320: This specification is intended for alloy steel and stainless steel bolting for low-temperature service. Grades L7, L43, and L7M are common for alloy steel, similar to A193 but suited for lower temperatures. For stainless steel in low-temperature applications, grades like B8 (304 stainless steel) and B8M (316 stainless steel) under A320 are appropriate, mirroring A193 but with an emphasis on impact properties at lower temperatures.

Carbon Steel Stud Bolts

ASTM A307: This specification covers carbon steel bolts, studs, and threaded rods of 60,000 PSI tensile strength. Grade B within A307 is often used for stud bolts in general applications where high strength is not required. It is commonly used in flanged connections in piping systems that do not involve high temperatures or pressures.

Special Applications

ASTM F1554: This specification covers anchor bolts designed to anchor structural supports to concrete foundations. While not typically used for high-temperature or pressure applications, grades like 55 and 105 might find use in specialized settings where anchoring strength is critical.

Check this article for more information about the ASTM materials for stud bolts for flanges.

 

**DISCLAIMER: Accuracy and Reliability of Content**

The information provided in this blog post is intended for general informational purposes only and should not be construed as professional advice. While we strive to provide accurate and up-to-date information, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the content contained herein. Any reliance you place on the information presented in this blog post is strictly at your own risk. We disclaim any liability for any loss or damage, including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from reliance on information contained in this blog post. We encourage readers to verify the accuracy and relevance of any information presented here with other sources and seek professional advice or guidance where appropriate. Links to third-party websites or resources provided in this blog post are for convenience only and do not imply endorsement or approval of the content, products, services, or opinions expressed on those websites. We have no control over the nature, content, and availability of those sites and assume no responsibility for their accuracy, legality, or decency. We reserve the right to modify, update, or remove any content in this blog post at any time without prior notice. By accessing and using this blog post, you acknowledge and agree to these terms and conditions. If you do not agree with these terms, please refrain from accessing or using the information provided herein.

About the Author

Projectmaterials Team

Projectmaterials Team

Blog.projectmaterials.com is an online resource dedicated to providing in-depth information, analysis, and educational content related to the fields of project materials management, engineering, and procurement, particularly within the oil & gas, construction, shipbuilding, energy, and renewable energy sectors. It aims to serve professionals and enthusiasts in these industries by offering valuable insights into materials, equipment, and techniques used in various projects, focusing on the selection, application, and maintenance of these resources. Key features of the blog include: * Educational Articles: Comprehensive posts that cover topics ranging from the technical aspects of piping products (pipes, valves, fittings, flanges, gaskets, bolts, instrumentation) to structural steel and process equipment (including oil extraction systems, drilling rigs, wellheads, pumps, compressors, and separation systems). * Industry Insights: Updates on the latest trends, technologies, and regulatory changes affecting the industries covered. * Guides and How-Tos: Practical advice on selecting the right materials and equipment for specific applications, as well as tips on installation, maintenance, and troubleshooting. * Safety and Standards: Information on safety equipment for production sites, risk mitigation procedures, and an overview of relevant industry standards and regulatory frameworks. The website is designed to support the professional development of engineers, procurement specialists, project managers, and other stakeholders involved in project plant businesses, by disseminating critical know-how and best practices. Whether readers are new to the field or seasoned professionals, blog.projectmaterials.com offers resources to enhance their understanding and performance in managing project materials effectively.

Should you wish to reach out to the author of this article, we invite you to contact us via email

Appreciate this content? Consider showing your support by tipping the author!

tether USDT

0xB1384F161400810A7B23DE63F02990EC8A7A3e36

bitcoin logo payment

bc1qs5h47qjmefpxhrw8gddl6ms9les23mvhcl9gvu

6 Responses

  1. first of all, very appreciate for providing information.

    Is it permissible to inquire why the list of cast valves for austenitic stainless steel includes specifications for forgings?

    1. Thanks, Rick. Have you seen the platform projectmaterials.com? We offer several services for people engaged in project business:
      – Academy (150+ not-too technical articles about piping and steel, to know the basics)
      – Stockists Directory (directory of 1000+ stockists of piping products that you can search and contact)
      – RFQs (if you have an RFQ/MTO and need offers, you can simply post it on the platform and let suppliers come to you)
      – Surplus (if you have surplus stock, you can post it and convert it into cash)

      We help buyers and sellers of materials for projects! We hope you can pass this information to your friends and colleagues, to help us grow our community!
      With our best regards, Projectmaterials Lugano Switzerland

  2. Hello.
    I’ve got a question.
    Where do I get that chart ?? or Which is source information??
    Can you reply me ???

    Thanks for your information

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

RELATED POSTS

Didn’t find an answer?

Ask AI! 👉

Try our Artificial Intelligence to find an answer to any of your technical and commercial questions

  • AI: Hi, ask any technical or commercial question!

Thinking... ...

trusted by over 3M readers/Year worldwide