Projectmaterials

weldolet installed e1548871642955

Weldolet, Sockolets, Elbolets Sizes (MSS-SP 97)

Reading Time: 5 minutes

Weldolet dimensions and weights charts (showing “center of the run to Weldolet face”,  “size-on-size” and “reducing” Weldolets sizes by NPS and schedule, and “run sizes combinations”), as well as the sizes of Sockolets.

WELDOLET DIMENSIONS & WEIGHTS

CENTER OF RUN-TO-FACE SIZES

Weldolet Dimensions: Center of run to Weldolet face dimension
The distance between the run pipe center line and the Weldolet top-bore in mm (by pipe NPS/Schedule and Weldolet size):

RUN PIPE NPSRUN PIPE SCHEDULE

WELDOLET DIMENSIONS

SIZESCH.2″3″4″6″8″10″12″14″16″18″20″24″
2″STD-40
XS-80
70
XXS-16087
3″STD-40
XS-80
8491
XXS-160101119
4″STD-40
XS-80
97103111
XXS-160114132144
STD-40124130138148
6″XS-80124130138165
XXS-160141159171192
STD-40149156164176183
8″XS-80149156164191197
XXS-160167184197218224
STD-40176183191205210218
10″XS-80176183191218238235
XXS-160194211224245251265
STD202208216228255245251
12″XS202208216243264267265
XXS-160219237249270276291324
14″STD218224232245251259267270
XS218224231239279270278286
16″STD243249257270276284292295300
XS243249257284305293303306319
18″STD268275283295302310318321325335
XS268275283310330321329332338352
20″STD294300308321327335343346351356376
XS294300308335356346354557364370386
24″STD345351359372378386394397402406411446
XS345351359386406397405408414421429449

WELDOLET DIMENSIONS & WEIGTHS

Size-on-Size Weldolet Schedule 40

Weldolet Dimensions: Size on Size Type
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCDWeldolet weight in lbs
 1/23/41 3/815/16 5/80.15
 3/47/81 5/81  3/1613/160.25
11  1/1621  7/161  1/320.4
1 1/41 1/42 3/81 3/41 3/80.7
1 1/21  5/162 7/821 5/80.8
21 1/23 1/22  9/162  1/161.5
2 1/21 5/84 1/632  7/162.25
31 3/44 13/163 11/163  1/163.75
3 1/225 3/83 7/83  9/165
4264 3/446.7
52 1/47 1/85  9/165  1/168.5
62 3/88 1/26 11/166  1/1614
82 3/410 3/88 11/167 15/1628
103  1/1612  9/1610 13/161039
123 3/814 7/812 13/161265
143 1/216 1/814  1/1613 1/470
163 11/1618 1/416  1/1615 1/492
184  1/1620 3/418 5/817 1/4125
204 5/823  1/1620  1/1619 1/4175
245 3/827 7/825 1/823 1/4280
305 3/834  1/1630  7/1629 1/4440
365 3/834  1/1636 1/235 1/41180

Size-on-Size Weldolet Schedule XS

Weldolet size on size dimensions
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCDWeldolet weight in lbs
1/23/41.37515/165/80.15
3/47/81.6251.187513/160.25
11.062521.43751.031250.4
1 1/141.252.43751.751.3750.7
1.51.31252.87521.6250.9
21.53.52.56252.06251.6
2 1/21.6254.062532.43752.5
31.754.81253.68753.06254.1
3 1/225.3753.8753.56255.1
4264.7547.5
52.257.1255.56255.06259.5
63.06258.8756.68756.062515
83.87510.6258.68757.62532
103.512.87510.43759.7546
123.937515.18751311.7561
144.12516.687514.31251375
164.437518.87516.515115
184.687521.12518.62517130
20523.37520.812519187
245.527.87525.12523316
265.7530.12527.2525370

Size-on-Size Weldolet Schedule 160/XXS

Weldolet size on size dimensions
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCWeldolet weight in lbs
1/21 1/81 3/89/160.25
3/41 1/41 3/43/40.70
11 1/2210.80
1 1/41 3/42 7/161 5/161.25
1 1/222 3/41 1/21.75
22 3/163 3/161 11/162.15
2 1/22 7/163 13/162 1/83.40
32 7/84 3/42 7/86.35
43 5/1663 7/810.50
53 11/167 3/84 13/1614.25
64 1/88 11/165 3/430.25

Reducing Weldolet Schedule 40

Weldolet size on size dimensions
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCWeldolet weight in lbs
1/85/815/80.10
1/45/815/80.10
3/83/41 1/43/40.15
1/23/41 3/815/160.20
3/47/81 3/41 3/160.25
11 1/162 1/81 7/160.50
1 1/41 1/42 9/161 3/40.80
1 1/21 5/162 7/821.00
21 1/23 1/22 9/161.75
2 1/21 5/84 1/1632.50
31 3/44 13/163 11/164.00
3 1/21 7/85 1/445.50
4264 3/46.30
52 1/47 1/165 9/1610.25
62 3/88 3/166 11/1612.00
82 3/410 1/48 11/1623.00
103 1/1612 11/1610 13/1636.00
123 3/814 7/812 13/1659.00
143 1/216 9/1614 1/1666.00
163 11/1618 1/416 1/1675.00
183 13/1621 1/1618 1/1697.00
20423 3/1620118.00
244 9/1627 3/424 3/16220.00
264 11/1629 7/826 1/4265.00
305 3/834 1/230 7/16430.00
365 3/840 1/236 1/2900.00

Reducing Weldolet Schedule XS

Weldolet size on size dimensions
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCWeldolet weight in lbs
1/85/815/80.10
1/45/815/80.10
3/83/41 1/43/40.15
1/23/41 3/815/160.20
3/47/81 3/41 3/160.30
11 1/162 1/81 7/160.50
1 1/41 1/42 9/161 3/40.90
1 1/21 5/162 7/821.10
21 1/23 1/22 9/161.75
2 1/21 5/84 1/1632.60
31 3/44 13/163 11/164.10
3 1/21 7/85 1/445.60
4264 3/46.40
52 1/47 1/165 9/1610.40
63 1/168 5/166 11/1623.00
83 7/811 1/28 11/1637.00
103 11/1613 3/1610 7/1646.00
124 1/1615 5/812 1/261.00
143 15/161613 13/1670.00
164 3/1618 3/815 7/8102.00
184 3/820 3/817 15/16130.00
204 11/1622 15/1620 1/16158.00
245 1/228 1/224 3/16290.00
265 3/430 1/827 1/4350.00

Reducing Weldolet Schedule 160/XXS

Weldolet size on size dimensions
Sizes in inches, weights in pounds

Weldolet Size (inches)ABCWeldolet weight in lbs
1/21 1/81 3/89/160.25
3/41 1/41 3/43/40.70
11 1/2210.85
1 1/41 3/42 7/161 5/161.25
1 1/222 3/41 1/21.75
22 3/163 3/161 11/162.15
2 1/22 7/163 13/162 1/83.40
32 7/84 3/42 7/86.30
43 5/1663 7/810.50
53 11/167 3/84 13/1614.25
64 1/89 5/165 3/428.00

HEAVY-WALL WELDOLETS SIZES

heavy WT weldolets

Run WT3/411 1/41 1/21 3/422 1/42 3/43
Run SizeACACACACACACACACAC
32 7/82.9063 7/322.9003 3/82.9063 5/82.9004 1/82.9004 9/162.90052.9005 7/82.9006 1/162.900
3 1/23 1/83.3593 1/43.3593 7/163 3593 3/43.3594 3/163.3594 5/83.3595 1/163.35963.3596 5/163.359
43 5/163.8433 3/83.8263 1/23.8283 7/83.8264 3/43.8264 3/43.8265 3/163.8266 1/83.8266 9/163.826
53 3/44.8123 3/44.81244.8124 1/44.8124 3/44.8125 1/44.8125 3/44.8126 5/84.8127 3/164.812
64 1/85.7504 11/325.7614 1/25.7604 11/165.7605 1/45.7605 3/45.7606 1/45.7607 1/45.7607 13/165.760
84 3/167.6254 5/87.6254 7/87.6255 5/327.6255 3/47.6256 11/327.6256 15/167.6258 3/327.6258 11/167.625
104 1/49.7504 27/329.75059.5625 5/169.5625 15/169.5626 9/169.5627 3/169.5628 7/169.5629 1/169.562
124 3/811.7505 3/3211.7505 3/811.3755 11/1611.3756 5/1611.3756 15/1611.3757 9/1611.3758 13/1611.3759 7/1611.375
144 1/2135 1/4135 1/212.5005 13/1612.5006 5/1612.5006 15/1612.5007 9/1612.5008 13/1612.5009 7/1612.500
164 11/16155 7/815614.3126 7/1614.3106 5/814.3107 1/414.3107 7/814.3109 1/814.3109 3/414.310
185 1/8176 1/2176 1/216.1256 1/216.1266 13/1616.1267 7/1616.1268 7/3216.1269 13/3216.12610 1/3216.126
205 5/8196 3/419717.9377 9/1617.9387 25/3217.9388 3/3217.9388 21/3217.9389 29/3217.93810 15/3217.938
246 1/2237 5/823821.5648 23/3221.5648 31/3221.5649 13/1621.56810 1/221.56812 9/1621.56410 21/3221.564

WELDOLET RUN SIZES COMBINATIONS

Weldolet Size Sch. STD/XS

Pipe Run
Sizes
Branch Pipe Size (inches)
1/81/43/81/23/411 1/41 1/222 1/233 1/2456
3/83/81/21/23/411 1/41 1/222 1/233 1/2456
1/21/21-3/43/411 1/41 1/222 1/233 1/24568
1-3/41-3/421/2-11/411 1/2 – 1 1/41 1/222 1/233 1/2456810
2 1/2 – 1 1/421/2-11/436-31 1/2 – 1 1/42 1/2 – 222 1/234 – 3 1/245681014-12
36-336-3flat2 1/2 – 25-32 1/23 1/2 – 34 – 3 1/25568101216
flatflat8-312-63 1/2 – 35-46-56681014-121418
36-1036-145 – 48-612-810-881014-1220-1618-1622-20
flatflat10 – 618-1024-1418-1212-1014-1220-162222-2028-24
3/4 – 1/236 – 1236-2036-2636-2018-1420-1636-2436-2428-2436-30
36 – 1flatflatflatflat36-2036-24flatflat36-30flat
flatflatflatflat
Outlet sizes 8, 10, 12, 14, 16. 18, 24, 26. 20 orders to specific size combinations.Size consolidation for Weldolets only

Weldolet Size Sch. XXS/160

Pipe Run
Sizes
Branch Pipe Size (inches)
1/23/411 1/41 1/222 1/234
1/21 3/411 1/2 – 1 1/41 1/222 1/234
1 1/4 – 3/42 – 1 1/42 1/2 -1 1/42 1/2 -22 1/2 – 22 1/233 1/26
36 – 1 1/26 – 2 1/210-310-33 1/2 -33 1/2 -33 1/248
flat36-836-1236-128-45-44510
flatflatflat20-108-65612
2218-108-6814
36-2436-2012-101016
flatflat18-141218
36-201420
flat1622
1824
20
22
24
flat

(Source: Bonney Forge)

SOCKOLETS DIMENSIONS & WEIGTHS

Sockolet class 3000 “Size on Size”

Sockolets dimension1Sockolets dimension 2

Outlet Size (NPT)ABCDEApprox. Weight (lb)
1/211 3/815/160.62217/320.15
3/41 1/161 5/81 3/160.82415/320.25
11 5/1621 7/161.04923/320.45
1 1/41 5/162 3/81 3/41.3809/16 0.65
1 1/21 3/82 7/821.61021/320.85
21 1/23 1/22 9/162.06715/161.40
2 1/21 9/164 1/1632.4693/42.25
31 3/44 13/163 11/163.06815/163.75
3 1/21 11/165 3/84 7/163.54811/164.30
41 7/86 1/164 3/44.0261 1/166.60
52 7/167 1/45 1/45.04719.00
62 11/168 11/166 1/166.0651 3/1615.50

Notes: 

  • Class 3000 is to be used with schedule 80 pipes
  • Dimensions and tolerances by ASME B16.11 and MSS SP-97
  • Flat Sockolets are used on welding caps, elliptical heads, and flat surfaces
  • Each outlet size is available to fit any run curvature.

Sockolet class 6000 “Size on Size”

Sockolets dimension1Sockolets dimension 2

Outlet Size (NPS)ABCDEApprox. Weight (lb)
1/21 1/41 23/323/40.4667/80.50
3/41 7/161 61/6410.6147/80.80
11 9/162 7/161 5/160.81515/161.30
1 1/41 5/82 23/321 1/21.16013/161.60
1 1/21 11/163 1/41 15/161.3387/82.00
22 1/164 1/322 3/41.6891 3/165.15
    • Notes:
  • Class 6000 is to be used with schedule 160 pipe.
  • Dimensions and tolerances by ASME B16.11 and MSS SP-97
  • Flat Sockolets are used on welding caps, elliptical heads, and flat surfaces.
  • Outlet combinations fit many run pipe sizes, and fittings are marked accordingly

ELBOLET DIMENSIONS

Butt weld elbolet

Nominal Size of Elbow (NPS)Outlet Size (NPS)CL 3000 Threaded and Socket Weld
Sch. Standard and XS Buttweld
CL 6000 Threaded and Socket Weld
Sch. 160 and XXS Buttweld
CECE
36 – 3/41/41 1/21 19/321 1/21 19/32
36 – 3/43/81 1/21 19/321 1/21 19/32
36 – 3/41/21 1/21 19/321 23/321 7/8
36 – 13/41 23/321 7/82 1/42 1/4
36 – 212 1/42 1/42 7/82 1/2
36 – 21 1/42 7/82 1/23 1/82 11/16
36 – 21 1/23 1/82 11/164 3/163 1/4
36 – 324 3/163 1/4
Order
to
Specific
Elbow
Sizes
*2 1/24 3/163 1/4bw onlybw only
*35 1/163 7/8bw onlybw only
*46 5/84 13/16bw onlybw only
*69 3/86 1/2bw onlybw only
*813 5/168 1/16bw onlybw only
*1017 1/3210 3/8bw onlybw only
*1219 5/811 1/8bw onlybw only
Notes:
  • Class 3000 is to be used for Schedule 80 pipes
  • Class 6000 is to be used for Schedule 160 pipes
  • Dimensions and tolerances acc. to ASME B16.9, ASME B16.25, and, MSS SP-97.
  • Dimensions and tolerances under ANSI/ASME B16.11
  • Threaded ends per ANSI/ASME B1.20.1

**DISCLAIMER: Accuracy and Reliability of Content**

The information provided in this blog post is intended for general informational purposes only and should not be construed as professional advice. While we strive to provide accurate and up-to-date information, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the content contained herein. Any reliance you place on the information presented in this blog post is strictly at your own risk. We disclaim any liability for any loss or damage, including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from reliance on information contained in this blog post. We encourage readers to verify the accuracy and relevance of any information presented here with other sources and seek professional advice or guidance where appropriate. Links to third-party websites or resources provided in this blog post are for convenience only and do not imply endorsement or approval of the content, products, services, or opinions expressed on those websites. We have no control over the nature, content, and availability of those sites and assume no responsibility for their accuracy, legality, or decency. We reserve the right to modify, update, or remove any content in this blog post at any time without prior notice. By accessing and using this blog post, you acknowledge and agree to these terms and conditions. If you do not agree with these terms, please refrain from accessing or using the information provided herein.

About the Author

Projectmaterials Team

Projectmaterials Team

Blog.projectmaterials.com is an online resource dedicated to providing in-depth information, analysis, and educational content related to the fields of project materials management, engineering, and procurement, particularly within the oil & gas, construction, shipbuilding, energy, and renewable energy sectors. It aims to serve professionals and enthusiasts in these industries by offering valuable insights into materials, equipment, and techniques used in various projects, focusing on the selection, application, and maintenance of these resources.Key features of the blog include:* Educational Articles: Comprehensive posts that cover topics ranging from the technical aspects of piping products (pipes, valves, fittings, flanges, gaskets, bolts, instrumentation) to structural steel and process equipment (including oil extraction systems, drilling rigs, wellheads, pumps, compressors, and separation systems). * Industry Insights: Updates on the latest trends, technologies, and regulatory changes affecting the industries covered. * Guides and How-Tos: Practical advice on selecting the right materials and equipment for specific applications, as well as tips on installation, maintenance, and troubleshooting. * Safety and Standards: Information on safety equipment for production sites, risk mitigation procedures, and an overview of relevant industry standards and regulatory frameworks.The website is designed to support the professional development of engineers, procurement specialists, project managers, and other stakeholders involved in project plant businesses, by disseminating critical know-how and best practices. Whether readers are new to the field or seasoned professionals, blog.projectmaterials.com offers resources to enhance their understanding and performance in managing project materials effectively.

Should you wish to reach out to the author of this article, we invite you to contact us via email.

Appreciate this content? Consider showing your support by tipping the author!

tether USDT

0xB1384F161400810A7B23DE63F02990EC8A7A3e36

bitcoin logo payment

bc1qs5h47qjmefpxhrw8gddl6ms9les23mvhcl9gvu

16 Responses

  1. Dear Sir,
    We can provide you products for all your requirements for Branch fittings, forged fittings, flanges, fasteners, pipes & tubes.

    Kindly contact us on +919867815181 for fastest response you can also email us on [email protected]

    Regards,
    RANDHIR METAL AND ALLOYS PVT LTD

  2. Bonjour,

    Pourrions-nous avoir les articles ci-dessous:

    -Weldolet 18″ – 10″ x 2″ Schedule 160
    Piping class: B03S
    Acier au carbone ASTM A105
    ASME B16.25 & MSS SP 97
    Service H2S niveau 1 selon NACE-MR-01-75/ISO 15156
    Spécifications applicables GS EP PVV 144 et 612
    Imposition technique: Ceq inférieur ou égal à 0,42
    Certificats matières 3.1 suivant EN 10204

    -Weldolet 20″ – 16″ x 3″ Sch 80
    Acier carbone ASTM A234 WPB/ASME B 31.3
    Piping class: D51C (Nkossa)
    Service H2S niveau 1 selon nace-MR-01-75 / ISO 15156
    Matériel conforme à la GS.EP.PVV 144 & GS EP PVV 612
    Certificats matières: 3.1 suivant EN 10204.

    Merci de nous faire parvenir un devis incoterm CIF Port autonome de Pointe-Noire République du Congo

  3. Bonjour,

    pourrions-nous avoir les articles ci-dessous:

    -Weldolet 18″-10″ x 2″ Schedule 160
    Piping class: B03S
    Acier au carbone ASTM A105
    ASME B16.25 & MSS SP 97
    Service H2S niveau 1 selon NACE-MR-01-75/ISO 15156
    Spécifications applicables GS EP PVV 144 et 612
    Imposition technique: Ceq inférieur ou égal à 0,42
    Certificats matières 3.1 suivant EN 10204

    -Weldolet 20″-16″ x 3″ Sch 80
    Acier carbone ASTM A234 WPB/ASME B 31.3
    Piping class: D51C (Nkossa)
    Service H2S niveau 1 selon nace-MR-01-75 / ISO 15156
    Matériel conforme à la GS.EP.PVV 144 & GS EP PVV 612
    Certificats matières: 3.1 suivant EN 10204.

    Merci de nous faire parvenir un devis incoterm CIF Port autonome de Pointe-Noire République du Congo

  4. Hello,

    Kindly send the best price for the item below;

    Weldolet, 10 In X 3/4 In, Schedule 160, CS, ASTM A105, MSS SP-97

    QUANTITY: 25 pieces
    Kindly treat as urgent, thank you.

  5. Dear Sir,

    We are currently looking for the products in the list below.

    Could you pls send us your offer below listed products?

    These materials are required on a regular basis. Please send commercial offers with the best prices and prompt:

    1. Availability
    2. Terms of delivery to Kazakhstan. (Pls mention in your quote – delivery time)

    № Short Description Long Description Qty Unit
    1 WELDOLET:PIPE WELDOLET:PIPE;SIZE:10 IN X 2 IN,WT 14,27 MM /SCH 160 A694 F60;RATING:;MATERIAL:IN ACCORDANCE WITH NACE MR0175. FORGED CARBON STEEL FOR LOW TEMP SERVICE. ASTM-A694 GRADE F60;TYPE:BRANCH FITTING BUTT-WELD;SPECIFICATION:IN ACCORDANCE WITH TCO SPEC. L-ST-2009 LATEST REVISION;GRADE:;STANDARDS:ASME B16.9/ASME B31.3/MS;SHORT RUSSIAN TRANSLATION:ОТВОДНОЙ ПАТРУБОК; 8 Ea
    2 WELDOLET 8INX2IN WT 11.1MM/SCH 160 A694 F60 WELDOLET 8INX2IN WT 11.1MM/SCH 160 A694 F60 BRANCH FITTING BUTT-WELD, TYPE – WELDOLET, HEADER WEIGHT – 11.1MM WALL THICKNESS, BRANCH WEIGHT – SCHEDULE 160, MATERIAL- IN ACCORDANCE WITH NACE MR0175 FORGED CARBON STEEL FOR LOW TEMP SERVICE ASTM-A694 GRADE F60 IN ACCORDANCE WITH W-ST-2029 REV.1. MATERIAL TO;SHORT RUSSIAN TRANSLATION:БОБЫШКА ПРИВАРНАЯ; 4 Ea
    3 WELDOLET:PIPE;SIZE:6INX2IN,WT 9.53 MM/SCH 160 A694 F60, WELDOLET:PIPE;SIZE:6INX2IN,WT 9.53 MM/SCH 160 A694 F60, ITEM BRANCH FITTING BUTT-WELD;RATING:;MATERIAL:;TYPE:WELDOLET HEADER WEIGHT – 9.53 MM WALL THICKNESS. BRANCH WEIGHT – SCHEDULE 160 WALL THICKNESS;SPECIFICATION:IN ACCORDANCE WITH NACE MR0175 / ISO 15156. FORGED CARBON STEEL FOR LOW TEMP SERVICE. ASTM A694 GRADE F60.STANDARDS – ASME B16.9 /ASME B31.3/MSS-SP-97 INSPECTION REQUIREMENTS SHALL INCLUDE BS EN 10204. 3.2 IN ACCORDANCE WITH TCO SPEC. L-ST-2009 LATEST REVISION;GRADE:;STANDARDS:;ADDITIONAL INFO:;SHORT RUSSIAN TRANSLATION:БОБЫШКА; 2 Ea

    Thank you and looking forward to your reply!

  6. I need offer for below items:

    Sl Description of Materials Specifications, if any Code/Color/ Grade Unit Required Qty Material
    1 Weldolet DN25 Steel 20 TU 14-3-190-2004 Nos 6
    2 Weldolet T DN20 Steel 20 TU 14-3-190-2004 Nos 8
    3 Weldolet TDN15 Steel 20 TU 14-3-190-2004 Nos 6
    4 Socket DR 100 GOST 5525-88 Nos 14 Cast iron

  7. My Header/Run Pipe 52″ piggable, we would like insert 24″ weldolet, is possible to add custom bar to avoid pig stuck during pigging operation

  8. Dear Sir,

    kindly quote your best price for the following below items.
    S/N
    Description
    Unit
    Unit
    Ord. QTY
    1
    32″ X 1″ WELDOLET REDUCING SIZE, ASME B16.25, Sch. 160, WT 6.35 mm
    (Material grade :ASTM A860 WPHY 52)
    Nos.
    10
    2
    32″ X 2″ WELDOLET REDUCING SIZE, ASME B16.25, Sch. 160, WT. 8.7 mm
    (Material grade :ASTM A860 WPHY 52)
    Nos.
    10
    3
    32″ X 4″ WELDOLET REDUCING SIZE, ASME B16.25, Sch. 160, WT. 13.5 mm
    (Material grade :ASTM A860 WPHY 52).
    Nos.
    12
    4
    WN FLANGE 1″, RTJ, #1500 ASME B16.5, WT. 6.35 mm
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    10
    5
    WN FLANGE 2″, RTJ, #1500 ASME B16.5, WT. 8.7 mm
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    10
    6
    WN FLANGE 4″, RTJ, #1500 ASME B16.5, WT. 13.5 mm
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    12
    7
    WN FLANGE 32″, RTJ, # 1500 ASME B16.5, WT. 26.3 mm
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    1
    8
    BLIND FLANGE 1″, RTJ, #1500 ASME B16.5
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    10
    9
    BLIND FLANGE 2″, RTJ, #1500 ASME B16.5
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    10
    10
    BLIND FLANGE 4″, RTJ, #1500 ASME B16.5
    (Material Grade: ISO 5590-3 450-LS)
    Nos.
    12
    19
    1″ FLANGE BALL VALVE, RTJ, # 1500 FULL BORE ASME B16.10
    (Material Grade : ASTM A350 )

    Nos.
    8
    20
    2″ FLANGE BALL VALVE, RTJ, # 1500 FULL BORE ASME B16.10
    (Material Grade : ASTM A350 )
    Nos.
    8
    21
    4″ FLANGE BALL VALVE, RTJ # 1500 FULL BORE ASME B16.10
    (Material Grade : ASTM A350 )
    Nos.
    6

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

RELATED POSTS

Didn’t find an answer?

Ask AI! 👉

Try our Artificial Intelligence to find an answer to any of your technical and commercial questions

  • AI: Hi, ask any technical or commercial question!

Thinking... ...

trusted by over 3M readers/Year worldwide