fbpx

Socket Weld and Threaded Fittings (ASME B16.11)

How to define forged fittings? The term “forged fittings” refers to two families of pipe fittings (socket weld and threaded) used for small bore pipes and piping systems (generally below 4 inches in diameter for Class 3000, and below 2 inches for fittings in class 6000 and 9000). These fittings are manufactured by forging and machining solid steel and are available in a multitude of shapes like elbows, tees, reducers, unions, couplings. The ASME B16.11 specification covers socket and threaded fittings for oil and gas application. For larger pipe sizes, ASME B16.9 buttweld fittings shall be used instead.

FORGED FITTINGS ASME B16.11

Forged vs. Buttweld Fittings

Forged fittings are used for piping systems below 2 or 4 inches in diameter (4″ for 2000#/3000# fittings, 2″ for  6000#/9000# fittings), whereas buttweld fittings are used for larger diameter piping.

The two main types of forged fittings are the so-called socket weld fittings (which are connected to pipes by fillet welds) and threaded fittings (the pipe is screwed onto the fitting).

The ASME B16.11, MSS SP 75, MSS SP 83, MSS SP 95 specifications cover forged fittings (socket weld and threaded) to fit ASME B36.10 and ASME B36.19 carbon, alloy, stainless steel and nickel alloy pipes of small bore size.

Forged fittings are manufactured from solid blocks of steel, that are machined to obtain the final required shape within the tolerances set by the applicable specifications mentioned above. This is different from buttweld fittings, which are manufactured by cutting, bending and shaping seamless or welded steel pipes.

 

 

Forged fittings asme b16.11

 

Forged Fittings Types

Socket weld and threaded fittings are available in multiple shapes (elbows, tees, caps, adapters, couplings, etc), sizes (bore sizes between 1/8 and 4 inches, and ratings as 2000#, 3000#, 6000#, 9000#) and material grades (the most common are ASTM A105, ASTM A350 LF1/2/3/6 for low-temperatures, ASTM 182 for corrosive, high-temperature applications). The class of the fitting represents the maximum allowed pressure that the device can withstand.

Class 3000 fittings are used for pipes in schedule 80/XS; Class 6000 for pipes Sch. 160; Class 9000 fittings for pipes with larger wall thickness (XXS).

Forged Elbow 45/90 Degrees

Forged elbows are used to change the direction of the piping system by 45 or 90 degrees. Forged elbows are manufactured according to ASME B16.11 in various material grades, either with socket weld or threaded pipe connections. A special type is the so-called “street elbow”.

Forged Street Elbow ASME B16.11
Forged elbows 45 and 90 degrees, street elbow.

Forged Tee (Equal/Reducing)

Forged tees are used to branch a pipe at 90 degrees. Tees can be straight (equal) or reducing.

Forged tees ASME B16.11 are available with socket weld or threaded connections (NPT or BSP). The dimensions of forged tees are covered by the MSS SP 75 and the ASME B16.11 specifications.

 

Forged Tee ASME B16.11

 

Forged Lateral

Forged laterals feature a Y shape and are used to branch a pipe at 30-degrees (or different angles, according to the piping specifications).

Forged Lateral

Forged Plug (Round, Squared, Hex)

Forged plugs are available with a round, squared or hexagonal head and are used to blind pipes.
Pipe Plug Forged

Bushings

Hexagonal bushings are manufactured in accordance with ASME B16.11 and are used to join two threaded items of a different size.

Hexagonal Bushings ASME B16.11

Couplings (Half, Full)

Couplings are forged fittings manufactured in accordance with ASME B16.11 and are used to join pipes.

They are available in half or full size and with socket weld or threaded connections (or a combination of the two for special piping applications).

Forged Coupling, Half and Full

Reducers and Reducer Inserts

Reducers are available in two main types, called 1 and 2. They are used to connect pipes and reduce the bore size.

Forged Reducer and Reducer Insert

Union

Unions are available in the male to female, female to female types, lug nut, and Rockwood design. Unions comply with the MSS SP 83 standard.

Forged Union MSS SP 83

Welding Boss

Welding Boss

SOCKET WELD VS. THREADED FITTINGS

ASME B16.11 forged fittings are available with two types of end connections, which are called “socket weld” and “threaded” (shown in the picture).

Difference between socket weld and threaded fittings

SOCKET WELD FITTINGS

Socket weld fittings are connected to pipes by fillet welds, whereas threaded fittings are screwed onto the pipe (or vice-versa).
A socket weld fitting (left side) and a threaded fitting (right side).

Socket weld and threaded pipe fittings types

Socket weld fittings are used for applications where strong and long-lasting connections are required.  Socket weld fittings are very reliable but are time-consuming to install in a piping system (due to the heavy workload caused by welding operations on small parts).

Socket weld fittings are available in sizes from 1/8 to 4 inches and in classes between 2000# and 9000#.

The typical applications for socket weld fittings are:

  • Steam
  • Explosive fluids and gases
  • Acids and toxic fluids
  • Long service / durable installations

Socket weld and weld fittings connection

Fillet weld vs. Butt Weld: a butt welding connection fills the gaps between two devices, that are beveled at 30 degrees.

THREADED FITTINGS

Threaded fittings are used for less-critical piping systems, such as water distribution, fire protection, and cooling, or for low-pressure installations not subject to vibration, elongation and bending forces. Threaded pipe fittings are not suited for fluids with constantly changing temperatures, as sudden changes may crack the connection.

Taper threaded fittings connection

The two major types of threads are the BSP and NPT, which are not compatible one with the other:

BSP Fittings

BSP means “British Standard Pipe” and can be further divided into the BSPT (tapered) and BSPP (parallel) variations. The threads have a 55° angle in this case. BSP threaded fittings are less common than NPT threaded fittings in the oil and gas industry


NPT Fittings

NPT stands for “National Pipe Tapered” and is the dominant standard for threaded forged fittings in the oil and gas industry. NPT threading is covered by the ASME B1.20.1 specification and is based on 60° thread flank angles (vs. 55° of the BSP type).

BSP vs NPT thread fittings
BSP (BSPP/BSPT) vs NPT: thread angle 55 vs 60 Deg.

FORGED FITTINGS MATERIALS

Carbon steel fittings ASTM A105 (forged)

A105 socket weld and threaded fittings match carbon steel pipes for high-temperature services, like ASTM A53, A106 and API 5L. For low-temperature service, ASTM A350 socket/threaded fittings shall be used instead (to match ASTM A333 pipes).

A105 Forged Fittings Materials, Chemical Composition % A105 Forged Fittings, Mechanical Properties
Material Grade Grade or Class C Si Mn S P Cu Ni Cr Mo V Cb/Nb Tensile Strength min, Ksi Yield Point
Ksi
Yield Strength
Ksi @ 0.2%
Elongation in 2 in, %
ASTM A105 0.35 0.10-0.35 0.60-1.05 0.040 0.035 0.40 0.40 0.30 0.12 0.08 70 36 22
ASTM A181 60 0.35 0.10-0.35 1.10 0.050 0.050 60 30 22
70 0.35 0.10-0.35 1.10 0.050 0.050 70 36 18
ASTM A266 1 0.30 0.15-0.35 0.40-1.05 0.025 0.025 60-85 30 23
2 0.30 0.15-0.35 0.40-1.05 0.025 0.025 70-95 36 20
3 0.35 0.15-0.35 0.80-1.35 0.025 0.025 70-95 36 20
4 0.30 0.15-0.35 0.80-1.35 0.025 0.025 75-100 37.5 19
ASTM A350 LF1 0.30 0.15-0.30 0.60-1.35 0.040 0.035 0.40 0.40 0.30 0.12 0.08 0.02 60-85 30 25
LF2-1 0.30 0.15-0.30 0.60-1.35 0.040 0.035 0.40 0.40 0.30 0.12 0.08 0.02 70-95 36 22
LF2-2 0.30 0.15-0.30 0.60-1.35 0.040 0.035 0.40 0.40 0.30 0.12 0.08 0.02 70-95 36 22
LF3-1 0.20 0.20-0.35 0.90 0.040 0.035 0.40 3.30-3.70 0.30 0.12 0.03 0.02 70-95 37.5 22
LF3-2 0.20 0.20-0.35 0.90 0.040 0.035 0.40 3.30-3.70 0.30 0.12 0.03 0.02 70-95 37.5 22
LF5-1 0.30 0.20-0.35 0.60-1.35 0.040 0.035 0.40 1.00-2.00 0.30 0.12 0.03 0.02 60-85 30 25
LF5-2 0.30 0.20-0.35 0.60-1.35 0.040 0.035 0.40 1.00-2.00 0.30 0.12 0.03 0.02 70-95 37.5 22
LF6-1 0.22 0.15-0.30 1.15-1.50 0.025 0.025 0.40 0.40 0.30 0.12 0.04-0.11 0.02 66-91 52 22
LF6-2 0.22 0.15-0.30 1.15-1.50 0.025 0.025 0.40 0.40 0.30 0.12 0.04-0.11 0.02 75-100 60 20
LF6-3 0.22 0.15-0.30 1.15-1.50 0.025 0.025 0.40 0.40 0.30 0.12 0.04-0.11 0.02 75-100 60 20
LF9 0.20 0.40-1.06 0.040 0.035 0.75-1.25 1.60-2.24 0.30 0.12 0.03 0.02 63-88 46 25
LF787-2 0.07 0.40 0.40-0.70 0.025 0.025 1.00-1.30 0.70-1.00 0.60-0.90 0.15-0.25 0.03 0.02 min 65-85 55 20
LF787-3 0.07 0.40 0.40-0.70 0.025 0.025 1.00-1.30 0.70-1.00 0.60-0.90 0.15-0.25 0.03 0.02 min 75-95 65 20

Low-alloy steel fittings ASTM A182 (forged)

Low-alloy forged fittings match chrome-moly pipes ASTM A335 in grades P5 (for F5 fitting), P9 (for F9 fitting), P11 (for F11 fitting), P22 (for F22 fitting), P91 (for F91 fittings). The chemical composition of these common alloy grades for socket weld and threaded fittings is shown below:

Low-Alloy Forged Fittings Materials A182 F5 A182 F9 A182 F11 A182 F22 A182 F91
C 0.15 Max 0.15 Max 0.10-0.20 (2) 0.05-0.15 0.08-0.12
Mn 0.30-0.60 0.30-0.60 0.40-0.65 0.30-0.60 0.30-0.60
P 0.035 Max 0.030 Max 0.025 Max 0.035 Max 0.020 Max
S 0.030 Max 0.030 Max 0.040 Max 0.040 Max 0.010 Max
Si 0.50 Max 0.50-1.00 0.50-0.80 0.50 Max 0.20-0.50
Ni 0.50 Max 0.40 Max
Cr 4.0-6.0 8.0-10.0 1.00-1.50 2.00-2.50 8.0-9.5
Mo 0.44-0.65 0.90-1.10 0.44-0.65 0.90-1.10 0.85-1.05
V 0.18-0.25
Cu
Other Cb, 0.06-0.10; N, 0.03-0.07; Al, 0.04 max.

Stainless steel fittings ASTM A182 (forged)

Stainless steel forged fittings match ASTM A312 pipes. The chemical composition of stainless steel socket weld and threaded fittings is given below:

ASTM A182 Forged Fittings Materials in %
A182 Grade C Mn P S Si Ni Cr Mo Nb Ti Others
F304(1) 0.08 2.0 0.045 0.030 1.0 8.0-11.0 18.0-20.0
F304H 0.04-0.10 2.0 0.045 0.030 1.0 8.0-11.0 18.0-20.0
F304L(1) 0.030 2.0 0.045 0.030 1.0 8.0-13.0 18.0-20.0
F304N(2) 0.08 2.0 0.045 0.030 1.0 8.0-10.5 18.0-20.0
F304LN(2) 0.030 2.0 0.045 0.030 1.0 8.0-10.5 18.0-20.0
F309H 0.04-0.10 2.0 0.045 0.030 1.0 12.0-15.0 22.0-24.0
F310 0.25 2.0 0.045 0.030 1.0 19.0-22.0 24.0-26.0
F310H 0.04-0.10 2.0 0.045 0.030 1.0 19.0-22.0 24.0-26.0
F310MoLN 0.030 2.0 0.030 0.015 0.40 21.0-23.0 24.0-26.0 2.0-3.0 N 0.10-0.16
F316 0.08 2.0 0.045 0.030 1.0 10.0-14.0 16.0-18.0 2.0-3.0
F316H 0.04-0.10 2.0 0.045 0.030 1.0 10.0-14.0 16.0-18.0 2.0-3.0
F316L(1) 0.030 2.0 0.045 0.030 1.0 10.0-15.0 16.0-18.0 2.0-3.0
F316N(2) 0.08 2.0 0.045 0.030 1.0 11.0-14.0 16.0-18.0 2.0-3.0
F316LN(2) 0.030 2.0 0.045 0.030 1.0 11.0-14.0 16.0-18.0 2.0-3.0
F316Ti 0.08 2.0 0.045 0.030 1.0 10.0-14.0 16.0-18.0 2.0-3.0 (3) N 0.10 max
F317 0.08 2.0 0.045 0.030 1.0 11.0-15.0 18.0-20.0 3.0-4.0
F317L 0.030 2.0 0.045 0.030 1.0 11.0-15.0 18.0-20.0 3.0-4.0
F321 0.08 2.0 0.045 0.030 1.0 9.0-12.0 17.0-19.0 (4)
F321H 0.04-0.10 2.0 0.045 0.030 1.0 9.0-12.0 17.0-19.0 (5)
F347 0.08 2.0 0.045 0.030 1.0 9.0-13.0 17.0-20.0 (6)
F347H 0.04-0.10 2.0 0.045 0.030 1.0 9.0-13.0 17.0-20.0 (7)
F348 0.08 2.0 0.045 0.030 1.0 9.0-13.0 17.0-20.0 (6) Co 0.20
Ta 0.10
F348H 0.04-0.10 2.0 0.045 0.030 1.0 9.0-13.0 17.0-20.0 (7) Co 0.20
Ta 0.10

Socket weld fittings are available, also, in other grades as duplex and super duplex (ASTM A182 F51, F53/F55) and various nickel-alloys (Inconel, Incoloy, Monel, Hastelloy).

FORGED FITTINGS MANUFACTURERS

Join B2B marketplace

Comments

This post currently has one response

  • Hi , I’m looking for the following prices . 25mm threaded socket working pressure 10bar and threaded 25mm nipples all carbon steel .

Leave a Reply

Your email address will not be published. Required fields are marked *

Sidebar