Threaded Flanges Dimensions & Weights (ASME B16.5)

Home » Products » Piping » Threaded Flanges Dimensions & Weights (ASME B16.5)

Threaded Flanges Dimensions & Weights (ASME B16.5)

ASME B16.5 (Flanges), Flange Size & Weigth, Threaded Flanges

The article shows the ASME B16.5 dimensions of Threaded Flanges Classes from 150 to 2500 (NPS, ID, OD, Thickness, and bolting details, tolerances) – both in inches and millimeters.

ASME THREADED FLANGE DIMENSIONS & WEIGHTS

The article shows the ASME B16.5 dimensions and weights for threaded flanges.

THREADED FLANGE SIZES IN INCHES

THREADED CLASS 150

Threaded flange dimensions class 150 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	3.50″	2.38″	1.38″	.063″	1.19″	.62″	.38″	.56″	.62″	4
3/4″	1.14″	3.88″	2.75″	1.69″	.063″	1.50″	.62″	.44″	.56″	.62″	4
1″	1.41″	4.25″	3.12″	2.00″	.063″	1.94″	.69″	.50″	.63″	.62″	4
1-1/4″	1.75″	4.62″	3.50″	2.50″	.063″	2.31″	.81″	.56″	.75″	.62″	4
1-1/2″	1.99″	5.00″	3.88″	2.88″	.063″	2.56″	.88″	.62″	.82″	.62″	4
2″	2.50″	6.00″	4.75″	3.62″	.063″	3.06″	1.00″	.69″	.94″	.75″	4
2-1/2″	3.00″	7.00″	5.50″	4.12″	.063″	3.56″	1.12″	.82″	1.06″	.75″	4
3″	3.63″	7.50″	6.00″	5.00″	.063″	4.25″	1.19″	.88″	1.13″	.75″	4
3-1/2″	4.13″	8.50″	7.00″	5.50″	.063″	4.81″	1.25″	.88″	1.19″	.75″	8
4″	4.63″	9.00″	7.50″	6.19″	.063″	5.31″	1.31″	.88″	1.25″	.75″	8
5″	5.69″	10.00″	8.50″	7.31″	.063″	6.44″	1.44″	.88″	1.38″	.88″	8
6″	6.75″	11.00″	9.50″	8.50″	.063″	7.56″	1.56″	.94″	1.50″	.88″	8
8″	8.75″	13.50″	11.75″	10.62″	.063″	9.69″	1.75″	1.06″	1.69″	.88″	8
10″	10.88″	16.00″	14.25″	12.75″	.063″	12.00″	1.94″	1.13″	1.88″	1.00″	12
12″	12.94″	19.00″	17.00″	15.00″	.063″	14.38″	2.19″	1.19″	2.13″	1.00″	12
14″	14.19″	21.00″	18.75″	16.25″	.063″	15.75″	2.25″	1.32″	2.19″	1.12″	12
16″	16.19″	23.50″	21.25″	18.50″	.063″	18.00″	2.50″	1.38″	2.44″	1.12″	16
18″	18.19″	25.00″	22.75″	21.00″	.063″	19.88″	2.69″	1.50″	2.63″	1.25″	16
20″	20.19″	27.50″	25.00″	23.00″	.063″	22.00″	2.88″	1.63″	2.83″	1.25″	20
22″	22.19″	29.50″	27.25″	25.25″	.063″	24.25″	3.13″	1.75″	3.07″	1.38″	20
24″	24.19″	32.00″	29.50″	27.25″	.063″	26.12″	3.25″	1.82″	3.19″	1.38″	20

THREADED CLASS 300

Threaded flange dimensions class 300 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	3.75″	2.62″	1.38″	.063″	1.50″	0.88″	0.50″	0.82″	0.62″	4
3/4″	1.14″	4.62″	3.25″	1.69″	.063″	1.88″	1.00″	.056″	0.94″	0.75″	4
1″	1.41″	4.88″	3.50″	2.00″	.063″	2.12″	1.06″	0.63″	1.00″	0.75″	4
1-1/4″	1.75″	5.25″	3.88″	2.50″	.063″	2.50″	1.06″	0.69″	1.00″	0.75″	4
1-1/2″	1.99″	6.12″	4.50″	2.88″	.063″	2.75″	1.19″	0.75″	1.13″	0.88″	4
2″	2.50″	6.50″	5.00″	3.62″	.063″	3.31″	1.31″	0.82″	1.25″	0.75″	8
2-1/2″	3.00″	7.50″	5.88″	4.12″	.063″	3.94″	1.50″	0.94″	1.44″	0.88″	8
3″	3.63″	8.25″	6.62″	5.00″	.063″	4.62″	1.69″	1.06″	1.63″	0.88″	8
3-1/2″	4.13″	9.00″	7.25″	5.50″	.063″	5.25″	1.75″	1.13″	1.69″	0.88″	8
4″	4.63″	10.00″	7.88″	6.19″	.063″	5.75″	1.88″	1.19″	1.82″	0.88″	8
5″	5.69″	11.00″	9.25″	7.31″	.063″	7.00″	2.00″	1.32″	1.94″	0.88″	8
6″	6.75″	12.50″	10.62″	8.50″	.063″	8.12″	2.06″	1.38″	2.00″	0.88″	12
8″	8.75″	15.00″	13.00″	10.62″	.063″	10.25″	2.44″	1.56″	2.38″	1.00″	12
10″	10.88″	17.50″	15.25″	12.75″	.063″	12.62″	2.62″	1.82″	2.56″	1.12″	16
12″	12.94″	20.50″	17.75″	15.00″	.063″	14.75″	2.88″	1.94″	2.82″	1.25″	16
14″	14.19″	23.00″	20.25″	16.25″	.063″	16.75″	3.00″	2.06″	2.94″	1.25″	20
16″	16.19″	25.50″	22.50″	18.50″	.063″	19.00″	3.25″	2.19″	3.19″	1.38″	20
18″	18.19″	28.00″	24.75″	21.00″	.063″	21.00″	3.50″	2.32″	3.44″	1.38″	24
20″	20.19″	30.50″	27.00″	23.00″	.063″	23.12″	3.75″	2.44″	3.69″	1.38″	24
22″	22.19″	33.00″	29.25″	25.25″	.063″	25.25″	4.00″	2.57″	3.94″	1.63″	24
24″	24.19″	36.00″	32.00″	27.25″	.063″	27.62″	4.19″	2.69″	4.13″	1.62″	24

THREADED CLASS 400

Threaded flange dimensions class 400 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	3.75″	2.62″	0.12″	.250″	1.50″	1.13″	0.56″	0.88″	0.62″	4
3/4″	1.14″	4.62″	3.25″	0.12″	.250″	1.88″	1.25″	0.62″	1.00″	0.75″	4
1″	1.41″	4.88″	3.50″	0.12″	.250″	2.12″	1.31″	0.69″	1.06″	0.75″	4
1-1/4″	1.75″	5.25″	3.88″	0.19″	.250″	2.50″	1.37″	0.81″	1.12″	0.75″	4
1-1/2″	1.99″	6.12″	4.50″	0.25″	.250″	2.75″	1.50″	0.88″	1.25″	0.88″	4
2″	2.50″	6.50″	5.00″	0.31″	.250″	3.31″	1.69″	1.00″	1.44″	0.75″	8
2-1/2″	3.00″	7.50″	5.88″	0.31″	.250″	3.94″	1.87″	1.12″	1.62″	0.88″	8
3″	3.63″	8.25″	6.62″	0.38″	.250″	4.62″	2.06″	1.25″	1.81″	0.88″	8
3-1/2″	4.13″	9.00″	7.25″	0.38″	.250″	5.25″	2.19″	1.38″	1.94″	1.00″	8
4″	4.63″	10.00″	7.88″	0.44″	.250″	5.75″	2.25″	1.38″	2.00″	1.00″	8
5″	5.69″	11.00″	9.25″	0.44″	.250″	7.00″	2.37″	1.50″	2.12″	1.00″	8
6″	6.75″	12.50″	10.62″	0.50″	.250″	8.12″	2.50″	1.62″	2.25″	1.00″	12
8″	8.75″	15.00″	13.00″	0.50″	.250″	10.25″	2.94″	1.88″	2.69″	1.12″	12
10″	10.88″	17.50″	15.25″	0.50″	.250″	12.62″	3.13″	2.12″	2.88″	1.25″	16
12″	12.94″	20.50″	17.75″	0.50″	.250″	14.75″	3.37″	2.25″	3.12″	1.38″	16
14″	14.19″	23.00″	20.25″	0.50″	.250″	16.75″	3.56″	2.38″	3.31″	1.38″	20
16″	16.19″	25.50″	22.50″	0.50″	.250″	19.00″	3.94″	2.50″	3.69″	1.50″	20
18″	18.19″	28.00″	24.75″	0.50″	.250″	21.00″	4.13″	2.62″	3.88″	1.50″	24
20″	20.19″	30.50″	27.00″	0.50″	.250″	23.12″	4.25″	2.75″	4.00″	1.62″	24
22″	22.19″	33.00″	29.25″	0.50″	.250″	25.25″	4.50″	2.88″	4.25″	1.75″	24
24″	24.19″	36.00″	32.00″	0.50″	.250″	27.62″	4.75″	3.00″	4.50″	1.88″	24

THREADED CLASS 600

Threaded flange dimensions class 600 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	3.75″	2.62″	1.38″	.250″	1.50″	1.13″	0.56″	0.88″	0.62″	4
3/4″	1.14″	4.62″	3.25″	1.69″	.250″	1.88″	1.25″	0.62″	1.00″	0.75″	4
1″	1.41″	4.88″	3.50″	2.00″	.250″	2.12″	1.31″	0.69″	1.06″	0.75″	4
1-1/4″	1.75″	5.25″	3.88″	2.50″	.250″	2.50″	1.37″	0.81″	1.12″	0.75″	4
1-1/2″	1.99″	6.12″	4.50″	2.88″	.250″	2.75″	1.50″	0.88″	1.25″	0.88″	4
2″	2.50″	6.50″	5.00″	3.62″	.250″	3.31″	1.69″	1.00″	1.44″	0.75″	8
2-1/2″	3.00″	7.50″	5.88″	4.12″	.250″	3.94″	1.87″	1.12″	1.62″	0.88″	8

THREADED CLASS 900

Threaded flange dimensions class 900 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	4.75″	3.25″	1.38″	.250″	1.50″	1.50″	0.88″	1.25″	0.88″	4
3/4″	1.14″	5.13″	3.50″	1.69″	.250″	1.75″	1.63″	1.00″	1.38″	0.88″	4
1″	1.41″	5.88″	4.00″	2.00″	.250″	2.06″	1.88″	1.13″	1.63″	1.00″	4
1-1/4″	1.75″	6.25″	4.38″	2.50″	.250″	2.50″	1.88″	1.13″	1.63″	1.00″	4
1-1/2″	1.99″	7.00″	4.88″	2.88″	.250″	2.75″	2.00″	1.25″	1.75″	1.13″	4
2″	2.50″	8.50″	6.50″	3.63″	.250″	4.13″	2.50″	1.50″	2.25″	1.00″	8
2-1/2″	3.00″	9.63″	7.50″	4.13″	.250″	4.88″	2.75″	1.63″	2.50″	1.13″	8
3″	3.63″	9.50″	7.50″	5.00″	.250″	5.00″	2.38″	1.50″	2.13″	1.00″	8
4″	4.63″	11.50″	9.25″	6.19″	.250″	6.25″	3.00″	1.75″	2.75″	1.25″	8
5″	5.69″	13.75″	11.00″	7.31″	.250″	7.50″	3.38″	3.00″	3.13″	1.38″	8
6″	6.75″	15.00″	12.50″	8.50″	.250″	9.25″	3.63″	2.19″	3.38″	1.25″	12
8″	8.75″	18.50″	15.50″	10.63″	.250″	11.75″	4.25″	2.50″	4.00″	1.50″	12
10″	10.88″	21.50″	18.50″	12.75″	.250″	14.50″	4.50″	2.75″	4.25″	1.50″	16
12″	12.94″	24.00″	21.00″	15.00″	.250″	16.50″	4.88″	3.13″	4.63″	1.50″	20
14″	14.19″	25.25″	22.00″	16.25″	.250″	17.75″	5.38″	3.38″	5.13″	1.63″	20
16″	16.19″	27.75″	24.25″	18.50″	.250″	20.00″	5.50″	3.50″	5.25″	1.75″	20
18″	18.19″	31.00″	27.00″	21.00″	.250″	22.25″	6.25″	4.00″	6.00″	2.00″	20
20″	20.19″	33.75″	29.50″	23.00″	.250″	24.50″	6.50″	4.25″	6.25″	2.13″	20
24″	24.19″	41.00″	35.50″	27.25″	.250″	29.50″	8.25″	5.50″	8.00″	2.63″	20

THREADED CLASS 1500

Threaded flange dimensions class 1500 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	4.75″	3.25″	1.38″	.250″	1.50″	1.50″	0.88″	1.25″	0.88″	4
3/4″	1.14″	5.13″	3.50″	1.69″	.250″	1.75″	1.63″	1.00″	1.38″	0.88″	4
1″	1.41″	5.88″	4.00″	2.00″	.250″	2.06″	1.88″	1.13″	1.63″	1.00″	4
1-1/4″	1.75″	6.25″	4.38″	2.50″	.250″	2.50″	1.88″	1.13″	1.63″	1.00″	4
1-1/2″	1.99″	7.00″	4.88″	2.88″	.250″	2.75″	2.00″	1.25″	1.75″	1.13″	4
2″	2.50″	8.50″	6.50″	3.63″	.250″	4.13″	2.50″	1.50″	2.25″	1.00″	8
2-1/2″	3.00″	9.63″	7.50″	4.13″	.250″	4.88″	2.75″	1.63″	2.50″	1.13″	8

THREADED CLASS 2500

Threaded flange dimensions class 2500 in inches (ASME B16.5)

FLANGE NPS	Inside Diameter	Outside Diameter	Bolt Circle (BC)	Raised Face (R)	Raised Face (RF)	H	Raised Face Thickness (T)	T1	Flat Face Thickness (T2)	Bolt Hole (B)	No. of Bolt Holes
1/2″	0.93″	5.25″	3.50″	1.38″	.250″	1.69″	1.81″	1.19″	1.56″	0.88″	4
3/4″	1.14″	5.50″	3.75″	1.69″	.250″	2.00″	1.94″	1.25″	1.69″	0.88″	4
1″	1.41″	6.25″	4.25″	2.00″	.250″	2.25″	2.13″	1.38″	1.88″	1.00″	4
1-1/4″	1.75″	7.25″	5.13″	2.50″	.250″	2.88″	2.31″	1.50″	2.06″	1.13″	4
1-1/2″	1.99″	8.00″	5.75″	2.88″	.250″	3.13″	2.63″	1.75″	2.38″	1.25″	4
2″	2.50″	9.25″	6.75″	3.63″	.250″	3.75″	3.00″	2.00″	2.75″	1.13″	8
2-1/2″	3.00″	10.50″	7.75″	4.13″	.250″	4.50″	3.38″	2.25″	3.13″	1.25″	8

THREADED FLANGE SIZES IN MILLIMETERS

THREADED CLASS 150

Threaded flange dimensions class 150 in millimeters (ASME B16.5)

Size inch	D mm	X mm	G mm	t mm	T2 mm	Q mm
1/2	89	30.2	35.1	11.2	15.7	15.7
3/4	99	38.1	42.9	12.7	15.7	15.7
1	108	49.3	50.8	14.2	17.5	17.5
1¼	117	58.7	63.5	15.7	20.6	20.6
1½	127	65.0	73.2	17.5	22.4	22.4
2	152	77.7	91.9	19.1	25.4	25.4
2½	178	90.4	104.6	22.4	28.4	28.4
3	191	108.0	127.0	23.9	30.2	30.2
3½	216	122.2	139.7	23.9	31.8	31.8
4	229	134.9	157.2	23.9	33.3	33.3
5	254	163.6	185.7	23.9	36.6	36.6
6	279	192.0	215.9	25.4	39.6	39.6
8	343	246.1	269.7	28.4	44.5	44.5
10	406	304.8	323.9	30.2	49.3	49.3
12	483	365.3	381.0	31.8	55.6	55.6
14	533	400.1	412.8	35.1	57.2	57.2
16	597	457.2	469.9	36.6	63.5	63.5
18	635	505.0	533.4	39.6	68.3	68.3
20	699	558.8	584.2	42.9	73.2	73.2
24	813	663.4	692.2	47.8	82.6	82.6

Size	Bolts Drilling			Bolting Requirements
inch	Bolt circle Diameter mm	Holes #	Holes Dia. mm	Bolt Dia. inch.	Length FF Flange	Length RF Flange	Length RTJ Flange
1/2	60.5	4	15.7	1/2	50.8	57.2	–
3/4	69.9	4	15.7	1/2	50.8	63.5	–
1	79.2	4	15.7	1/2	57.2	63.5	76.2
1¼	88.9	4	15.7	1/2	57.2	69.9	82.6
1½	98.6	4	15.7	1/2	63.5	69.9	82.6
2	120.7	4	19.1	5/8	69.9	82.6	95.3
2½	139.7	4	19.1	5/8	76.2	88.9	101.6
3	152.4	4	19.1	5/8	76.2	88.9	101.6
3½	177.8	8	19.1	5/8	76.2	88.9	101.6
4	190.5	8	19.1	5/8	76.2	88.9	101.6
5	215.9	8	22.4	3/4	82.6	95.3	108.0
6	241.3	8	22.4	3/4	82.6	101.6	114.3
8	298.5	8	22.4	3/4	88.9	108.0	120.7
10	362.0	12	25.4	7/8	101.6	114.3	127.0
12	431.8	12	25.4	7/8	101.6	120.7	133.4
14	476.3	12	28.4	1	114.3	133.4	146.1
16	539.8	16	28.4	1	114.3	133.4	146.1
18	577.9	16	31.8	1^1/8	127.0	146.1	158.8
20	635.0	20	31.8	1^1/8	139.7	158.8	171.5
24	749.3	20	35.1	1¼	152.4	171.5	184.2

THREADED CLASS 300

Threaded flange dimensions class 300 in millimeters (ASME B16.5)

Size inch	D mm	X mm	G mm	t mm	B mm	T2 mm	Q mm
1/2	95	38.1	35.1	14.2	23.6	22.4	15.7
3/4	117	47.8	42.9	15.7	29.0	25.4	15.7
1	124	53.8	50.8	17.5	35.8	26.9	17.5
1¼	133	63.5	63.5	19.1	44.5	26.9	20.6
1½	155	69.9	73.2	20.6	50.5	30.2	22.4
2	165	84.1	91.9	22.4	63.5	33.3	28.4
2½	191	100.1	104.6	25.4	76.2	38.1	31.8
3	210	117.3	127.0	28.4	92.2	42.9	31.8
3½	229	133.4	139.7	30.2	104.9	44.5	36.6
4	254	146.1	157.2	31.8	117.6	47.8	36.6
5	279	177.8	185.7	35.1	144.5	50.8	42.9
6	318	206.2	215.9	36.6	171.5	52.3	46.0
8	381	260.4	269.7	41.1	222.3	62.0	50.8
10	445	320.5	323.9	47.8	276.4	66.5	55.6
12	521	374.7	381.0	50.8	328.7	73.2	60.5
14	584	425.5	412.8	63.8	360.4	76.2	63.5
16	648	482.6	469.9	57.2	411.2	82.6	68.3
18	711	533.4	533.4	60.5	462.0	88.9	69.9
20	775	587.2	584.2	63.5	512.8	95.3	73.2
24	914	701.5	692.2	69.9	614.4	106.4	82.6

Size	Bolts Drilling			Bolting Requirements
inch	Bolt circle Diameter mm	Holes #	Holes Dia. mm	Bolt Dia. inch.	Length FF Flange	Length RF Flange	Length RTJ Flange
1/2	66.5	4	15.7	1/2	57.2	63.5	76.2
3/4	82.6	4	19.1	5/8	63.5	76.2	88.9
1	88.9	4	19.1	5/8	63.5	76.2	88.9
1¼	98.6	4	19.1	5/8	69.9	82.6	95.3
1½	114.3	4	22.4	3/4	76.2	88.9	101.6
2	127.0	8	19.1	5/8	76.2	88.9	101.6
2½	149.4	8	22.4	3/4	82.6	101.6	114.3
3	168.1	8	22.4	3/4	88.9	108.0	120.7
3½	184.2	8	22.4	3/4	95.3	108.0	127.0
4	200.2	8	22.4	3/4	95.3	114.3	127.0
5	235.0	8	22.4	3/4	108.0	120.7	133.4
6	269.7	12	22.4	3/4	108.0	120.7	139.7
8	330.2	12	25.4	7/8	120.7	139.7	152.4
10	387.4	16	28.4	1	139.7	158.8	171.5
12	450.9	16	31.8	1^1/8	146.1	171.5	184.2
14	514.4	20	31.8	1^1/8	158.8	177.8	190.5
16	571.5	20	35.1	1¼	165.1	190.5	203.2
18	628.7	24	35.1	1¼	171.5	196.9	209.6
20	685.8	24	35.1	1¼	184.2	203.2	222.3
24	812.8	24	41.1	1½	203.2	228.6	254.0

THREADED CLASS 600

Threaded flange dimensions class 600 in millimeters (ASME B16.5)

Size inch	D mm	X mm	G mm	t mm	B2 mm	T2 mm	Q mm
1/2	95	38.1	35.1	14.2	22.4	22.4	15.7
3/4	117	47.8	42.9	15.7	27.7	25.4	15.7
1	124	53.8	50.8	17.5	34.5	26.9	17.5
1¼	133	63.5	63.5	20.6	43.2	28.4	20.6
1½	155	69.9	73.2	22.4	49.5	31.8	22.4
2	165	84.1	91.9	25.4	62.0	36.6	28.4
2½	191	100.1	104.6	28.4	74.7	41.1	31.8
3	210	117.3	127.0	31.8	90.7	46.0	35.1
3½	229	133.4	139.7	35.1	103.4	49.3	39.6
4	273	152.4	157.2	38.1	116.1	53.8	41.1
5	330	189.0	185.7	44.5	143.8	60.5	47.8
6	356	222.3	215.9	47.8	170.7	66.5	50.8
8	419	273.1	269.7	55.6	221.5	76.2	57.2
10	508	342.9	323.9	63.5	276.4	85.9	65.0
12	559	400.1	381.0	66.5	327.2	91.9	69.9
14	603	431.8	412.8	69.9	359.2	93.7	73.2
16	686	495.3	469.9	76.2	410.5	106.4	77.7
18	743	546.1	533.4	82.6	461.8	117.3	79.2
20	813	609.6	584.2	88.9	513.1	127.0	82.6
24	940	717.6	692.2	101.6	616.0	139.7	91.9

Size	Bolts Drilling			Bolting Requirements
inch	Bolt circle Diameter mm	Holes #	Holes Dia. mm	Bolt Dia. inch.	Length FF Flange	Length RF Flange	Length RTJ Flange
1/2	66.5	4	15.7	1/2	76.2	69.9	76.2
3/4	82.6	4	19.1	5/8	88.9	82.6	88.9
1	88.9	4	19.1	5/8	88.9	82.6	88.9
1¼	98.6	4	19.1	5/8	95.3	88.9	95.3
1½	114.3	4	22.4	3/4	108.0	101.6	108.0
2	127.0	8	19.1	5/8	108.0	101.6	108.0
2½	149.4	8	22.4	3/4	120.7	114.3	120.7
3	168.1	8	22.4	3/4	127.0	120.7	127.0
3½	184.2	8	25.4	7/8	139.7	133.4	139.7
4	215.9	8	25.4	7/8	146.1	139.7	146.1
5	266.7	8	28.4	1	165.1	158.8	165.1
6	292.1	12	28.4	1	171.5	165.1	171.5
8	349.3	12	31.8	1^1/8	190.5	184.2	196.9
10	431.8	16	35.1	1¼	215.9	209.6	215.9
12	489.0	20	35.1	1¼	222.3	215.9	222.3
14	527.1	20	38.1	1^3/8	235.0	228.6	235.0
16	603.3	20	41.1	1½	254.0	247.7	254.0
18	654.1	20	44.5	1^5/8	273.1	266.7	273.1
20	723.9	24	44.5	1^5/8	285.8	279.4	292.1
24	838.2	24	50.8	1^7/8	330.2	323.9	336.6

THREADED CLASS 900

Threaded flange dimensions class 900 in millimeters (ASME B16.5)

Size inch	D mm	X mm	G mm	t mm	B mm	T2 mm	Q mm
1/2	121	38.1	35.1	22.4	23.6	31.8	22.4
3/4	130	44.5	42.9	25.4	29.0	35.1	25.4
1	149	52.3	50.8	28.4	35.8	41.1	28.4
1¼	159	63.5	63.5	28.4	44.5	41.1	30.2
1½	178	69.9	73.2	31.8	50.5	44.5	31.8
2	216	104.6	91.9	38.1	63.5	57.2	38.1
2½	244	124.0	104.6	41.1	76.2	63.5	47.8
3	241	127.0	127.0	38.1	92.2	53.8	41.1
4	292	158.8	157.2	44.5	117.6	69.9	47.8
5	349	190.5	185.7	50.8	144.5	79.2	53.8
6	381	235.0	215.9	55.6	171.5	85.9	57.2
8	470	298.5	269.7	63.5	222.3	101.6	63.5
10	546	368.3	323.9	69.9	276.4	108.0	71.4
12	610	419.1	381.0	79.2	328.7	117.3	76.2
14	641	450.9	412.8	85.9	360.4	130.0	82.6
16	705	508.0	469.9	88.9	411.2	133.4	85.9
18	787	565.2	533.4	101.6	462.0	152.4	88.9
20	857	622.3	584.2	108.0	512.8	158.8	91.9
24	1041	749.3	692.2	139.7	614.4	203.2	101.6

Size	Bolts Drilling			Bolting Requirements
inch	Bolt circle Diameter mm	Holes #	Holes Dia. mm	Bolt Dia. inch.	Length FF Flange	Length RF Flange	Length RTJ Flange
1/2	82.6	4	22.4	3/4	108.0	101.6	108.0
3/4	88.9	4	22.4	3/4	114.3	108.0	114.3
1	101.6	4	25.4	7/8	127.0	120.7	127.0
1¼	111.3	4	25.4	7/8	127.0	120.7	127.0
1½	124.0	4	28.4	1	139.7	133.4	139.7
2	165.1	8	25.4	7/8	146.1	139.7	146.1
2½	190.5	8	28.4	1	158.8	152.4	158.8
3	190.5	8	25.4	7/8	146.1	139.7	146.1
4	235.0	8	31.8	1^1/8	171.5	165.1	171.5
5	279.4	8	35.1	1¼	190.5	184.2	190.5
6	317.5	12	31.8	1^1/8	190.5	184.2	196.9
8	393.7	12	38.1	1^3/8	222.3	215.9	222.3
10	469.9	16	38.1	1^3/8	235.0	228.6	235.0
12	533.4	20	38.1	1^3/8	254.0	247.7	254.0
14	558.8	20	41.1	1½	273.1	266.7	292.1
16	616.0	20	44.5	1^5/8	285.8	279.4	298.5
18	685.8	20	50.8	1^7/8	323.9	317.5	333.6
20	749.3	20	53.8	2	349.3	342.9	362.0
24	901.7	20	66.5	1½	438.2	431.8	457.2

TOLERANCE OF THREADED FLANGES

ASME B16.5 provides specific tolerances for threaded flanges to ensure they fit properly, function as intended, and maintain seal integrity under operating conditions. Threaded flanges, designed to connect pipes without welding, have internal threads that match the external threads of the pipe. Here are general tolerance values for key dimensions of threaded flanges according to ASME B16.5, suitable for various sizes and pressure classes:

Diameter of Bolt Circle (P):

Tolerance: ±1.6 mm (±1/16 inch) for flanges through NPS 24, ensuring uniform distribution of bolt loads.

Diameter of Bolt Holes (Q):

Tolerance: Generally oversized relative to the bolt diameter by about +3 mm (1/8 inch), facilitating easier alignment and assembly.

Flange Thickness (T):

Tolerance: Varies but for flanges up to NPS 24, a general guideline is ±3 mm (±1/8 inch). This ensures the flange has adequate strength without unnecessary bulk.

Outside Diameter of Flange (O):

Tolerance: ±1.6 mm (±1/16 inch) for sizes up to NPS 24. This tolerance affects how the flange fits within the system and interfaces with other components.

Thread Dimensions:

The tolerance for the threaded portion of the flange is critical for ensuring a proper fit with the pipe. ASME B1.20.1 provides the standards for pipe threads, and ASME B16.5 references these for threaded flanges to ensure compatibility.

Length Through Hub (Y):

Tolerance: Specific tolerances apply to ensure that the flange aligns correctly with the mating pipe and does not interfere with thread engagement.

Inside Diameter (B):

Tolerance: For threaded flanges, the inside diameter at the base of the thread (or the end of the flange) has a tolerance to ensure that it aligns with the pipe’s outside diameter, facilitating a secure and leak-free connection. The tolerance is typically generous to accommodate the pipe threading.

Facing Finish:

Tolerance: The surface finish of the flange face, which can be critical for seal performance, especially if a gasket is used in conjunction with the threaded connection. Specific Ra values are provided based on the gasket material and type of facing.

Ensuring adherence to these tolerances is crucial for the successful implementation of threaded flanges in a piping system. The precise tolerances enable proper thread engagement, alignment, and sealing capability, which are essential for the operational reliability and safety of the system. For exact tolerance values, especially for specific flange sizes and pressure classes, a direct reference to the ASME B16.5 standard is recommended.

THREADED FLANGES WEIGHTS

THREADED FLANGE WEIGHT in KGS.

The table shows the ASME B16.5 threaded flange (THD) weights in Kgs. by Flange NPS and Class (carbon/alloy steel materials; for higher grades, consider adjusting weight using the delta-specific weight carbon/other grades)

NPS	Class 150	Class 300	Class 400	Class 600	Class 900	Class 1500	Class 2500
1/2	0.5	0.9	0.9	0.9	2.7	2.7	3.2
3/4	0.9	1.4	1.4	1.4	2.7	2.7	4.1
1	0.9	1.4	1.6	1.8	3.4	3.6	5.4
1¼	1.4	2	2	2.3	4.5	4.5	8.1
1½	1.4	2.9	2.9	3.2	6.3	6.3	11.3
2	2.3	3.2	3.6	4.1	9.9	11.3	17.1
2½	3.6	4.5	5.4	5.9	13.9	16.2	24.8
3	4.1	6.3	6.8	7.2	16.2	21.6	37.4
3½	5.4	7.7	9.5	9.5		32.9
4	5.9	10.8	11.7	16.7	23.9		57.2
5	6.8	13.9	13.9	28.4	37.4	59.4	94.5
6	8.6	17.6	19.8	36	49.5	74.3	145.4
8	13.5	26.1	30.2	51.8	77.4	117	218.3
10	19.4	36.5	40	79.7	110.3	196.2	416.3
12	28.8	51.8	58.5	96.8	146.7	300.2	585
14	40.5	74.3	85	116.6	180	423
16	44.1	99	113.9	164.7	206.6	562.5
18	58.5	126	139.5	214.2	291.2	731.3
20	74.3	146.3	170.1	275.4	356.4	922.5
22	83.3	166.5	182.3	265.5
24	99	220.5	242.6	394.2	666	1271

THREADED FLANGE WEIGHT in LBS.

The table shows the ASME B16.5 threaded flange (THD) weights in Lbs. by Flange NPS and Class (carbon/alloy steel materials; for higher grades, consider adjusting weight using the delta-specific weight carbon/other grades)

CLASS 150	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	1
	¾	2
	1	2
	1¼	3
	1½	3
	2	5
	2½	8
	3	9
	3½	12
	4	13
	5	15
	6	19
	8	30
	10	43
	12	64
	14	90
	16	98
	18	130
	20	165
	22	185
	24	220
CLASS 300	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	2
	¾	3
	1	3
	1¼	4.5
	1½	6.5
	2	7
	2½	10
	3	14
	3½	17
	4	24
	5	31
	6	39
	8	58
	10	81
	12	115
	14	165
	16	220
	18	280
	20	325
	22	370
	24	490
CLASS 400	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	2
	¾	3
	1	3.5
	1¼	4.5
	1½	6.5
	2	8
	2½	12
	3	15
	3½	21
	4	26
	5	31
	6	44
	8	67
	10	91
	12	130
	14	191
	16	253
	18	310
	20	378
	22	405
	24	539
CLASS 600	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	2
	¾	3
	1	4
	1¼	5
	1½	7
	2	9
	2½	13
	3	16
	3½	21
	4	37
	5	63
	6	80
	8	115
	10	177
	12	215
	14	259
	16	366
	18	476
	20	612
	22	590
	24	876
CLASS 900	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	6
	¾	6
	1	7.5
	1¼	10
	1½	14
	2	22
	2½	31
	3	36
	4	53
	5	83
	6	110
	8	172
	10	245
	12	326
	14	400
	16	459
	18	647
	20	792
	24	1480
CLASS 1500	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	6
	¾	6
	1	8
	1¼	10
	1½	14
	2	25
	2½	36
	3	48
	4	73
	5	132
	6	165
	8	260
	10	436
	12	667
	14	940
	16	1250
	18	1625
	20	2050
	24	2825
CLASS 2500	Nominal Pipe Size	Threaded Weight in Lbs./unit
	½	7
	¾	9
	1	12
	1¼	18
	1½	25
	2	38
	2½	55
	3	83
	4	127
	5	210
	6	323
	8	485
	10	925
	12	1300

**DISCLAIMER: Accuracy and Reliability of Content**

The information provided in this blog post is intended for general informational purposes only and should not be construed as professional advice. While we strive to provide accurate and up-to-date information, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the content contained herein. Any reliance you place on the information presented in this blog post is strictly at your own risk. We disclaim any liability for any loss or damage, including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from reliance on information contained in this blog post. We encourage readers to verify the accuracy and relevance of any information presented here with other sources and seek professional advice or guidance where appropriate. Links to third-party websites or resources provided in this blog post are for convenience only and do not imply endorsement or approval of the content, products, services, or opinions expressed on those websites. We have no control over the nature, content, and availability of those sites and assume no responsibility for their accuracy, legality, or decency. We reserve the right to modify, update, or remove any content in this blog post at any time without prior notice. By accessing and using this blog post, you acknowledge and agree to these terms and conditions. If you do not agree with these terms, please refrain from accessing or using the information provided herein.

About the Author

Projectmaterials Team

Blog.projectmaterials.com is an online resource dedicated to providing in-depth information, analysis, and educational content related to the fields of project materials management, engineering, and procurement, particularly within the oil & gas, construction, shipbuilding, energy, and renewable energy sectors. It aims to serve professionals and enthusiasts in these industries by offering valuable insights into materials, equipment, and techniques used in various projects, focusing on the selection, application, and maintenance of these resources. Key features of the blog include: * Educational Articles: Comprehensive posts that cover topics ranging from the technical aspects of piping products (pipes, valves, fittings, flanges, gaskets, bolts, instrumentation) to structural steel and process equipment (including oil extraction systems, drilling rigs, wellheads, pumps, compressors, and separation systems). * Industry Insights: Updates on the latest trends, technologies, and regulatory changes affecting the industries covered. * Guides and How-Tos: Practical advice on selecting the right materials and equipment for specific applications, as well as tips on installation, maintenance, and troubleshooting. * Safety and Standards: Information on safety equipment for production sites, risk mitigation procedures, and an overview of relevant industry standards and regulatory frameworks. The website is designed to support the professional development of engineers, procurement specialists, project managers, and other stakeholders involved in project plant businesses, by disseminating critical know-how and best practices. Whether readers are new to the field or seasoned professionals, blog.projectmaterials.com offers resources to enhance their understanding and performance in managing project materials effectively.

Should you wish to reach out to the author of this article, we invite you to contact us via email.

Threaded Flanges Dimensions & Weights (ASME B16.5)

Threaded Flanges Dimensions & Weights (ASME B16.5)

ASME THREADED FLANGE DIMENSIONS & WEIGHTS

THREADED FLANGE SIZES IN INCHES

THREADED CLASS 150

THREADED CLASS 300

THREADED CLASS 400

THREADED CLASS 600

THREADED CLASS 900

THREADED CLASS 1500

THREADED CLASS 2500

THREADED FLANGE SIZES IN MILLIMETERS

THREADED CLASS 150

THREADED CLASS 300

THREADED CLASS 600

THREADED CLASS 900

TOLERANCE OF THREADED FLANGES

THREADED FLANGES WEIGHTS

THREADED FLANGE WEIGHT in KGS.

THREADED FLANGE WEIGHT in LBS.

Projectmaterials Team

Leave a Reply Cancel reply

Enjoy Free Knowledge